Air conditioner size guide and capacity estimate
Estimate a room’s cooling-capacity range from its dimensions and stated assumptions.
Indicative cooling capacity
2.5 to 3 kW
Indicative cooling capacity: 2.5 to 3 kW.
Room measurements
Floor area
20 m²
Room volume
48 m³
Area × 125 to 150 W/m². Assumes a flat 2.4 m ceiling, average sun and average insulation.
Enter the room and state the assumptions
This air conditioner size guide calculates a cooling-capacity reference from the floor area of one enclosed residential room. It assumes average sun exposure and insulation with a flat 2.4 m ceiling.
Enter wall-to-wall length and width in metres or feet, then enter the actual ceiling height. The tool converts feet to metres before calculating area and volume. Switching units preserves the room’s dimensions.
The area method comes from Climat’s split-system sizing guide. Its stated rule of thumb is 125 to 150 watts of cooling per square metre for standard ceilings and average sun exposure.
The entered dimensions are measurements. Average sun and insulation are assumptions you must compare with the room. This calculator applies that single area rule, separately from the source’s indicative equipment-size tables.
The browser limits this reference to rooms up to 50 m² with a flat 2.4 m ceiling. Other heights retain the measured volume but stop the capacity estimate. It adds no invented multiplier for height, glazing or location.
Understand the capacity range
Multiply the floor area by 125 and 150, then divide each answer by 1,000 to obtain the range in kilowatts (kW). Area equals length × width. Volume equals area × ceiling height.
A larger entered floor area increases both ends proportionally. Height changes the volume, while a nonstandard ceiling stops this area-only capacity reference. The range is an indicative allowance, without a probability or accuracy guarantee.
Cooling capacity describes heat removed from the room. Electrical consumption depends on the selected unit’s efficiency and operating conditions. A 3 kW cooling output does not mean 3 kW of electrical input, or a fixed hourly bill.
A split system needs indoor and outdoor units positioned for the installation. A portable unit needs its specified exhaust arrangement. The Australian Government’s heating and cooling guidance explains these differences and notes that portable units are less effective and efficient than installed units.
This room reference applies no portable-unit penalty and approves no model. Compare the selected model’s rated cooling output, installation requirements and climate-zone energy label separately.
Know when the simple estimate is insufficient
A fictional 5 × 4 m room with a 2.4 m ceiling has 20 m² of floor area and 48 m³ of volume. Multiplying 20 by 125 and 150 gives 2,500 to 3,000 watts, displayed as 2.5 to 3 kW.
Changing that room’s length to 6 m gives 24 m² and 57.6 m³, with a displayed range of 3 to 3.6 kW. Those figures assume the same average sun and insulation.
Large unshaded windows, poor insulation or strong afternoon sun can make this reference unsuitable. Kitchens and equipment add heat. Open doorways, adjoining rooms and raked ceilings change the space an installer must assess.
The range does not certify a heat load, building design or equipment selection. For those conditions, arrange a room-specific heat-load assessment with a qualified air-conditioning professional before choosing the system. Give them the measured dimensions and details of windows, shading, insulation and room use.
If you sell air conditioners, keep the confirmed cooling output and electrical input in separate fields in the product record. The related guide explains how to organise those specifications for customers.