Body measurements chart for clothing

Record clothing measurements and export a labelled chart. Your measurements stay in this browser.

Choose the record

Garment checklist
Measurement unit

Enter tape readings

Chest or bust

Fullest point, with the tape level.

Optional. Use the same point.

Natural waist

At your natural waist crease.

Optional. Use the same point.

Hips

Fullest hips and seat, tape level.

Optional. Use the same point.

Inside leg

Crotch to ankle along inner leg.

Optional. Use the same point.

Tape-position details only. Leave out personal details.

First readings recorded

4 of 4

Measurement chart

Recorded clothing measurements
MeasurementFirst cmRepeat cmRecord status
Chest or bust circumference9292Same reading
Natural waist circumference7474Same reading
Hip circumference98Not enteredRepeat not entered
Inside leg7877.5Readings differ

Blank means not entered. Different readings stay separate.

4 of 4 first readings recorded.

Fictional example. This record does not estimate size or fit.

Take each clothing measurement at a stated point

A body measurements chart records the tape positions you measured. Choose the garment checklist, enter each reading and compare the labelled record with the retailer’s own chart.

Stand upright with your feet together and breathe normally. Use a flexible tape over underwear or close-fitting clothes. Keep circumference measurements level, without compressing the body. Ask someone to help with the inside leg.

1 Chest or bust. 2 Natural waist. 3 Fullest hips. 4 Inside leg. The horizontal tape continues around the body.
Tape positions for this worksheet
MeasurementWhere the tape goes
Chest or bustAround the fullest chest or bust, across the back at the same level. Keep your arms relaxed.
Natural waistAround the natural waist crease. Bend gently sideways to find it, then stand upright before reading.
HipsAround the fullest part of the hips and seat. Keep your feet together and check the tape stays level.
Inside legFrom the crotch down the inside leg to the ankle. Stand upright while a helper reads the tape.

The UNH Cooperative Extension sewing guide explains the chest, waist and hip reference points and the crotch-to-ankle inseam. This worksheet uses those clothing labels for every customer. A chart labelled female or male still needs its own stated tape positions.

Record and export the measured values

The fictional example records a 92 cm chest, 74 cm waist, 98 cm hips and 78 cm inside leg. The hip repeat is blank. The inside-leg repeat is 77.5 cm, so the chart shows that the readings differ.

Take the tape off and repeat a measurement at the same point. The worksheet keeps both values instead of averaging them or choosing one. Matching numbers confirm that the entries match, without proving the tape position was correct.

Blank fields stay labelled as not entered. A repeat without a first reading stays visible as a repeat. Download CSV includes the selected checklist’s labels, both readings and their record status. Open that file to print the same record.

Switching units converts the recorded quantities using 1 inch = 2.54 cm, the factor in the NIST conversion table. The screen shows up to two decimal places. The downloaded values keep additional conversion precision.

The optional note is for a tape-position detail, such as “ankle endpoint”. Leave out names and contact details. Entries stay on this page and clear when you leave. The worksheet sends no measurements or notes to a server.

Compare the record with an actual garment chart

Match each recorded label to the retailer’s measurement instructions before comparing numbers. A body measurement goes around the person. A garment measurement describes the finished clothing, sometimes measured flat and sometimes as a full circumference.

Ease is the difference between a finished garment measurement and the corresponding body measurement. Its amount depends on the garment design and fabric. A commercial size label identifies an entry in that brand’s chart.

For sewing, use the pattern’s body-measurement chart to select the starting pattern size. Read its finished measurements and fit notes separately. For ready-to-wear clothing, check whether the retailer publishes body ranges or measurements of the actual garment.

A flat chest width cannot be compared directly with a full chest circumference. Follow the retailer’s stated method, including whether to double a flat width. Check the intended fit and fabric stretch before deciding which chart row to use.

This worksheet records measurements only. It makes no body-shape classification, health assessment or automatic size recommendation. If two readings disagree, repeat the measurement at the stated point before using the record.