Coffee grind size guide by brewing method
Look up grind texture and a maker’s starting dial setting for five brewing methods.
Grind texture
Medium-fine
Start at 12 · Baratza Encore
Finer than drip; coarser than espresso.
Maker starting point. Adjust to your recipe and beans.
Medium-fine. Start at 12 on Baratza Encore. Finer than drip; coarser than espresso. Maker starting point. Adjust to your recipe and beans.
Choose the brewing method
This coffee grind size guide matches five brewing methods with a relative texture and a starting setting for your selected Baratza grinder.
Espresso uses a fine grind. Automatic drip is a filter method, while French press steeps the grounds in water before plunging. AeroPress combines steeping with pressing through a filter.
Choose Chemex for its own filter reference. AeroPress’s regular medium-fine reference sits between drip and espresso. Its espresso-style recipes can use a finer grind.
The two grinder options are separate references. Encore ESP Pro and other grinders need their own charts. Turkish coffee, moka pots and cold brew are outside this lookup.
Read the grind reference
The texture words describe relative particle size. Fine grounds are smaller than coarse grounds, but these labels do not specify a measured micrometre interval.
AeroPress’s grind guidance supplies the texture order. The table pairs it with the starting settings in the Baratza Encore manual and Encore ESP manual.
| Brewing method | Relative texture | Encore start | Encore ESP start |
|---|---|---|---|
| Espresso | Fine | 8 | 15 |
| AeroPress | Medium-fine | 12 | 22 |
| Automatic drip | Medium | 18 | 28 |
| Chemex | Medium-coarse | 20 | 30 |
| French press | Coarse | 28 | 32 |
For example, choose AeroPress and Encore. The result is medium-fine, with a starting setting of 12. Changing the model to Encore ESP selects its own published start of 22.
That change is a table lookup. It does not establish that 12 on an Encore equals 22 on an Encore ESP for every bean or calibration.
The Encore ESP uses smaller adjustment steps from 1 to 20 and larger steps from 21 to 40. Its espresso start of 15 assumes a medium roast and an 18 g dose.
Adjust against the actual brew
Use the maker’s number as a starting point, then brew with the dose and water quantity your recipe specifies. Compare the flow and taste with that recipe’s expected result.
Finer grounds increase resistance to water flow. For a filter brew that drains too slowly, try a small coarser adjustment while keeping the rest of the recipe unchanged.
If water runs through too quickly, try a small finer adjustment and compare the next brew. Taste alone does not identify grind size as the cause of a problem.
Follow the grinder’s adjustment instructions. These Baratza manuals require it to be running or completely empty of beans during adjustment. For AeroPress, follow the AeroPress pressing instructions and avoid forcing the plunger.
Record a setting that works with your beans and recipe. A reference setting cannot guarantee a flavour result or establish that a grinder suits every espresso basket.
When buying beans in different pack sizes, compare their cost per 100 g with the unit pricing calculator below.