Cubic weight calculator
Compare your parcel’s actual weight with its cubic weight.
Under your entered rule
Chargeable weight
6 kg
Cubic weight is larger.
Chargeable weight is 6 kg under the entered rule.
Parcel breakdown
| Measure | Result |
|---|---|
| Parcel volume | 24 litres |
| Cubic / dimensional weight | 6 kg |
| Actual weight | 2 kg |
250 kg per m³ = 4,000 cm³ per kg.
Cubic and dimensional weight
Uses the greater of actual and cubic weight, before carrier rounding and minimum weights. This is a weight comparison, not a postage quote.
Figures show up to two decimal places. Small volumes use litres. Calculations use unrounded values.
Cubic weight, also called dimensional weight, converts the space a parcel occupies into a weight for charging. Multiply length by width by height in metres, then multiply that volume by the cubic factor.
The example gives 0.4 × 0.3 × 0.2 = 24 litres (0.024 m³). Multiplying by 250 kg per m³ gives 6 kg. The larger of 6 kg cubic weight and 2 kg actual weight is 6 kg.
A dimensional divisor uses centimetres instead. Divide length × width × height in centimetres by the divisor to get kilograms. The equivalent divisor is 1,000,000 divided by the cubic factor. A factor of 250 equals a divisor of 4,000, so 40 × 30 × 20 / 4,000 also gives 6 kg.
Compare packaging sizes
A larger carton raises cubic weight even when the product stays the same. This hypothetical comparison holds packed actual weight at 2 kg and uses a factor of 250 kg per m³.
| Carton | Volume | Cubic weight | Chargeable weight |
|---|---|---|---|
| 30 × 20 × 10 cm | 6 litres | 1.5 kg | 2 kg |
| 40 × 30 × 20 cm | 24 litres | 6 kg | 6 kg |
The smaller carton is charged on actual weight under this rule. The larger carton triples chargeable weight. Keep enough protective packing, then compare the finished outside dimensions.
Use your carrier’s factor
Australia Post’s cubic weight guide specifies 250 kg per m³. Measure irregular parcels at their maximum outside points.
Australia Post and AusPost are the same carrier. For an AusPost cubic weight calculation, select Cubic factor and enter 250 in Conversion value.
The result applies the conversion you enter. A carrier price quote also applies the service’s weight bands, rounding and minimum chargeable weights, plus destination and other charges.
Non-contract parcels below 1 kg actual weight generally avoid Australia Post cubing, although the carrier reserves the right to apply it. Its size and weight guidelines also distinguish domestic own-packaging charges from flat-rate packaging and international parcels. Australia Post International uses actual weight.
DHL Express’s Australian service guide uses a divisor of 5,000. Select Divisor and enter 5,000 to compare that rule. With the example’s 40 × 30 × 20 cm carton, 24,000 / 5,000 gives 4.8 kg dimensional weight. At 2 kg actual weight, the entered rule gives 4.8 kg chargeable weight. The lower weight does not establish which carrier costs less.
Use the factor or divisor in your service agreement for packaging comparisons. Then use the carrier’s quote for the final price. Put your customer-facing delivery commitments in your shipping policy.