What is my face shape? Use the calculator

Compare face measurements and find an approximate outline for choosing frame styles. Your photo and measurements stay in this browser.

Your measurements

Measurement source

Centre hairline to the bottom of the chin.

Across the widest visible forehead.

Between the outermost cheekbone points.

Straight across between the two jaw corners.

Outline cue

Closest outline

Oval

Nearby: No other rule within 3%.

Proportion summary

Length / cheeks

1.36

Forehead / cheeks

0.89

Jaw / cheeks

0.86

Approximate style categories from the published rules below. Frame fit needs separate measurements.

Closest outline: Oval.

Enter or mark your measurements

This face shape calculator compares four measurements and your outline cue to suggest an approximate face-outline category. Retailers can offer it as a starting point before customers compare glasses.

Measure face length from the centre hairline to the bottom of the chin. Measure forehead width across its widest visible part, and cheekbone width between the outermost cheekbone points.

Jawline width here is the straight distance between the two jaw corners. Do not enter one side from ear to chin or a tape length around the jaw.

Use the same unit for all four entries. Centimetres, inches and photo pixels give the same ratios when every measurement uses one consistent scale. The example uses 19, 12.5, 14 and 12 centimetres.

For a photo, choose a front-facing picture with hair clear of the outline. Select a measurement, then mark its two endpoints. Repeat for all four measurements.

Arrow keys move the photo marker by five pixels. Hold Shift for one pixel. Enter sets an endpoint. Choose a measurement again to replace it, or clear all marks and start again.

The photo stays in browser memory. Camera angle, close-up perspective, hair and landmark placement change the proportions. A tilted picture can still be marked along its tilted outline, but head rotation changes the visible widths.

Read the face-shape result

The calculator distinguishes oval, round, square, diamond, oblong, heart and triangle outlines. It applies the rules in the order below and returns the first match.

Omni Calculator’s face-shape guide describes qualitative measurement comparisons. The numerical cut-offs below are this calculator’s published style rules, without a scientific confidence score.

  1. Triangle: jaw width is more than 1.05 times both cheekbone width and forehead width.
  2. Heart: forehead width is at least 0.95 times cheekbone width, and jaw width is less than 0.9 times forehead width.
  3. Diamond: the outline cue is angular, cheeks exceed both other widths by more than 5%, and length exceeds 1.1 times cheekbone width.
  4. Oblong: length is at least 1.5 times cheekbone width. Forehead and jaw each reach 85% of cheekbone width, and their difference is at most 10% of cheekbone width.
  5. Round or square: length is at most 1.15 times cheekbone width. The rounded cue gives round; angular gives square.
  6. Oval: measurements pass the consistency check and none of the earlier rules matches.

These labels describe the rules that match your entries. Oval is the remaining category, so the result does not establish a biological type.

Illustrative diamond measurements are length 19, forehead 12, cheeks 14 and jaw 11, with Angular selected. Changing the cue to Rounded gives Oval.

For an oblong example, enter length 21, forehead 13, cheeks 14 and jaw 13. Reducing only length to 20.99 gives Oval.

The nearby-outlines check moves each measurement up and down by 3%, one at a time. It lists any different result. This shows sensitivity to small changes, without estimating accuracy or probability.

Use the result when choosing frames

Compare a curved frame with an angular one and decide which appearance you prefer. A shape label gives you a way to organise that comparison, without prescribing a frame style.

An outline category describes proportions. An appearance preview shows how a selected frame looks in a picture. Physical fit depends on lens width, bridge width, temple length and the frame’s construction.

Keep a comfortable existing frame’s dimensions beside the retailer’s size information. Check bridge contact, temple pressure and whether the frame stays in place when you move.

A retailer can carry the selected frame style into an appearance preview. The related virtual try-on guide explains that step and its limits.

Check an uncertain result

Repeat any measurement that changes the result. Keep the same landmarks and unit, then compare the new ratios with the original entries.

If two labels appear close, compare frames under both. A small movement across a rule boundary is a reason to keep both style options open.

For a photo, use a level, front-facing view with the outline visible. Re-mark a hidden hairline or jaw corner using a clearer picture, rather than guessing its position.

The consistency check rejects non-positive values, entries above 10,000 and extreme proportions. Length must be between 0.7 and 2.5 times the widest width; each width must reach 40% of the widest.

Those are input checks for this tool. The result assesses neither attractiveness nor identity, ethnicity or health. Use a separate physical fitting check before choosing a frame size.