Golf club size guide from a declared fitting reference
Look up iron length adjustments or a putter length using separate manufacturer charts.
Iron length adjustment
+0.5 inches
Relative to Stix standard iron length.
Stix iron length adjustment: +0.5 inches.
Chart lookup only. Confirm the actual club in a fitting.
Choose the club and measure correctly
This golf club size guide keeps iron adjustments separate from finished putter lengths. Select the reference that matches your measurements.
For Stix irons, measure height and wrist to floor in golf shoes with arms relaxed. Both measurements must sit inside the same published row.
Stix publishes inclusive bands with shared endpoints. This lookup keeps every matching row and leaves gaps unfilled. It never rounds a measurement into a band.
For the Never Compromise putter size guide, use its fitting stand and mirror. The grip top meets the upper hand’s wrist crease in putting posture. Enter stand A and mirror B readings.
The putter chart covers stand readings from 28 to 35 inches in half-inch steps. Mirror positions run from 8.5 to 12.5. Intermediate readings have no published cell.
Standard length is the maker’s baseline for the particular iron. An adjustment changes that baseline. A loose shaft’s length is a different measurement from a finished club’s length.
Read iron and putter references separately
In the Stix length chart, a height of 75 inches and wrist-to-floor measurement of 38 inches match +0.5 inches. Apply that adjustment to the chosen Stix iron’s standard specification.
At 76 inches tall and 40 inches wrist to floor, two Stix rows meet. The lookup retains +0.5 and +1 inches for the fitting to resolve.
The Never Compromise fitting chart uses a separate grid. Stand A at 32.5 inches and mirror B at 10 give a finished putter length of 34 inches.
Choose NC putter to load those example readings. Its result is a length to try, without an iron adjustment added.
Check the club in a fitting
Try the chart result with your normal setup. A length lookup leaves lie angle, posture and technique for a fitting that checks actual ball contact.
For putters, Never Compromise follows the chart with a trial of a nearby-length putter. Keep your putting stance consistent while comparing lengths.
If the measurements fall outside a row or between published cells, take the measurements to a fitter. Carry the named reference and its result when comparing actual clubs.