Golf grip size guide by hand measurement
Compare your hand length with Golf Pride and Lizard Skins swing-grip charts.
Chart sizes
Standard
Golf Pride · At boundary
Golf Pride: Standard. At boundary.
Selected chart intervals
19.05 cm hand length
| Grip size | Hand length |
|---|---|
| Junior | Under 5 |
| Undersize | 5 to 6.5 |
| Standard | 6.6 to 7.5 |
| Midsize | 7.6 to 9 |
| Jumbo | Over 9 |
Matching interval: 6.6 to 7.5 inches.
Nominal chart sizes. Installed diameter depends on the grip and its build.
Measure for the grip chart
This golf grip size guide matches whole-hand length to the selected maker’s swing-grip chart. It keeps every matching size and shows where a measurement falls outside the printed intervals.
Golf Pride’s size guide measures the upper grip hand from the wrist crease to the middle fingertip. Lizard Skins’ golf chart measures from the bottom of the palm to the middle fingertip.
Both use the whole hand. Measuring only from the base of the middle finger gives a different length and does not suit either chart.
The result names a nominal size, such as Standard. Measure a fitted grip separately to learn its outside diameter. These charts cover swing grips, separately from putter shapes and sizes.
Compare the hand-size interval
The fictional example starts at 19.05 cm, exactly 7.5 inches. Golf Pride returns Standard at its upper endpoint. Lizard Skins returns Standard or Midsize because both printed intervals include 7.5 inches.
At 9 inches, Lizard Skins returns Midsize or Oversize. Golf Pride returns Midsize because its Jumbo range starts above 9 inches. Each result keeps its maker’s labels.
Golf Pride leaves gaps between 6.5 and 6.6 inches and between 7.5 and 7.6 inches. A 7.55-inch entry returns no chart match. The tool preserves that gap instead of rounding the hand into a band.
Centimetres convert to inches by dividing by 2.54 before comparison. The reference keeps the maker’s inch endpoints. A shared boundary leaves both sizes to try.
Verify the installed grip
Compare the actual installed grip after the chart lookup. Core size, shaft butt diameter and tape build-up affect the finished size.
A grip’s core is its inside opening. A smaller core stretched onto the same shaft can feel larger and firmer. A nominal size alone does not specify that installation.
Golf Pride’s tape build-up guide explains how extra tape stretches the grip over a larger base. Tape under the lower hand also changes its taper. This tool calculates no tape count or installed diameter.
Hold the fitted grip in your usual position and compare comfort and finger contact. Golf Pride’s fit reference has the upper-hand fingertips just touching the heel pad. Try the actual model before changing a full set.
The chart cannot predict a swing change or a shot pattern. Use it to choose sizes to compare, then assess feel and performance with the fitted club.