Paper size guide: dimensions and print pixels

Look up paper dimensions and calculate print pixels at your chosen resolution.

Your print canvas

Orientation
Output units

Your print resolution

Use the resolution requested by your printer.

Required print pixels

2,480 × 3,508 px

A4 · Portrait · 300 pixels per inch

Physical canvas

Width

21 cm

Height

29.7 cm

A4 portrait is 21 × 29.7 cm and needs 2,480 × 3,508 pixels at 300 pixels per inch.

Look up paper and print dimensions

A4 paper measures 21 × 29.7 cm. Choose an A-series reference above for its physical dimensions and the pixels needed at your chosen resolution.

The table lists portrait dimensions, with the shorter edge first. Landscape swaps width and height. A square custom canvas keeps the same dimensions in either orientation.

PaperWidth × height, mmWidth × height, cm
A0841 × 118984.1 × 118.9
A1594 × 84159.4 × 84.1
A2420 × 59442 × 59.4
A3297 × 42029.7 × 42
A4210 × 29721 × 29.7
A5148 × 21014.8 × 21
A6105 × 14810.5 × 14.8
A774 × 1057.4 × 10.5

The A-series paper dimensions use published millimetre sizes. The calculator converts those exact measurements directly, without repeatedly halving rounded centimetres or inches.

Photo presets are explicitly 4 × 6, 5 × 7 and 8 × 10 inches. The poster preset is 12 × 18 inches. These are inch-based rectangles, not A-series standards.

For a canvas, sticker, wedding invitation or book, select Custom canvas and enter your printer’s specified dimensions in centimetres. A product category has no single universal trim size.

Convert physical size and pixels

Multiply each dimension in inches by pixels per inch (PPI) to calculate the pixel dimensions. One inch is 2.54 centimetres or 25.4 millimetres.

Pixel width = width in centimetres ÷ 2.54 × PPI. Apply the same calculation to height, then round each final result to the nearest whole pixel.

The tool keeps at least one pixel on each axis for a very small canvas at low resolution. Physical results keep up to two decimal places.

For the A4 example, 21 ÷ 2.54 × 300 = 2,480.31 pixels wide. Its height is 29.7 ÷ 2.54 × 300 = 3,507.87 pixels.

The rounded result is 2,480 × 3,508 pixels. A hypothetical custom canvas of 25 × 40 cm at 300 PPI needs 2,953 × 4,724 pixels.

To convert pixels to centimetres, divide the pixel count by PPI and multiply by 2.54. A 3,000-pixel edge prints at 25.4 cm with 300 PPI, or 50.8 cm with 150 PPI.

Pixels alone cannot determine centimetres because the same pixel count can be spread over different physical areas. Adobe’s print-resolution explanation describes that relationship.

The default 300 PPI is an example, not a print-quality guarantee. Use the resolution your printer requests for the medium and viewing distance.

Document size describes the intended physical output. Screen zoom changes how large the document appears on your monitor, so a 100% screen view is not a physical ruler.

Check the actual print and frame area

Finished trim is the size after cutting. Bleed extends backgrounds beyond that cut, while the safe area keeps text and other important content inside it.

Your printer’s artwork specification sets those margins. UVU Printing Services’ file guidance explains how bleed and safe margins protect the edges during trimming.

For an illustrative 3 mm bleed on each side of A4, the full artwork canvas is 216 × 303 mm. Enter 21.6 × 30.3 cm as Custom canvas to calculate that file’s pixels.

A frame’s opening is the visible image area. A mount can cover the print’s edges, and the outer frame includes its surround. An A4 label alone cannot determine either measurement.

Compare the frame product’s stated print fit, visible opening and outside dimensions before ordering. Canvas wrapping can also use artwork outside the visible front face.

Compare the source image’s pixel dimensions with the requirement before export. A larger pixel count created through resampling does not recover original photographic detail.

Adobe’s resampling guidance explains that upsampling estimates new pixels. A file can meet the calculated pixel dimensions while still containing a soft source image.