Time card calculator for shift hours and breaks

Total recorded shifts after unpaid breaks and download a timesheet.

Declared period

Time basis: local dates with entered UTC offsets. Defaults use Perth time.

Recorded shifts

Shift 1

Total unpaid break time in this shift.

Recorded for checking. This time stays paid.

UTC offsets for this shift

Minutes east of UTC. Perth is 480; UTC itself is 0.

Use the finish offset after any clock change.

Shift 2

Total unpaid break time in this shift.

Recorded for checking. This time stays paid.

UTC offsets for this shift

Minutes east of UTC. Perth is 480; UTC itself is 0.

Use the finish offset after any clock change.

Flat-rate illustration

Hours only if blank. No entitlement calculation.

Paid time from recorded shifts

14 h 45 min

After unpaid breaks. Paid breaks stay included.

Paid time: 14 h 45 min.

Period totals

Decimal hours

14.75 hours

Elapsed time

16 h 0 min

Hours by shift

ShiftLocal recordElapsedPaid timeDecimal hours
Shift 11 Jun 2026 09:00 to 1 Jun 2026 17:008 h 0 min7 h 30 min7.5
Shift 22 Jun 2026 22:00 to 3 Jun 2026 06:008 h 0 min7 h 15 min7.25

CSV keeps the original records and exact minute totals.

Enter the recorded shifts and breaks

This time card calculator adds elapsed shift time and deducts the unpaid breaks you enter. Paid breaks remain in the paid-hours total.

Declare the first and last dates of the period, including both ends. Enter a separate start date and finish date for each shift. An overnight shift finishes on the following date.

Enter whole minutes for each break type. If a shift has several breaks, add the unpaid breaks together and the paid breaks together. The two break totals cannot exceed elapsed time.

The calculator refuses a finish that precedes its start, a zero-length shift or an interval longer than 24 elapsed hours. It also refuses overlapping shifts and shifts outside the declared period.

Use up to 31 shifts and dates from 1900 to 2100. These are the tool’s input limits. A recorded shift remains an entered record; the calculation does not establish approval.

Check the hours and decimal conversion

The fictional example starts with a same-day shift from 09:00 to 17:00. Its eight elapsed hours less 30 unpaid minutes leave 7 h 30 min, or 7.5 hours.

The 15-minute paid break stays included. The second shift runs from 22:00 to 06:00 on the next date. Eight elapsed hours less 45 unpaid minutes leave 7 h 15 min, or 7.25 hours.

Together, the shifts total 885 paid minutes: 14 h 45 min, or 14.75 hours. Both shifts use UTC+08:00 throughout, entered as 480 minutes east of Coordinated Universal Time (UTC).

Divide paid minutes by 60 to convert them to hours. Incorrect conversion: 7 h 30 min becomes 7.30 hours. Correct conversion: 30 divided by 60 is 0.5, so the result is 7.5 hours.

Calculations keep whole minutes and add them before conversion. Decimal displays round to two places below 100 hours and whole hours from 100. The hours-and-minutes result and CSV minute totals preserve every entered minute.

Export and compare the timesheet

Download the CSV to keep the declared period alongside each shift’s original local dates and times. Each row includes both UTC offsets and both break types, plus elapsed minutes and paid minutes.

The export also carries unrounded decimal hours and a total row. Compare those records with the payroll input before rounding. This tool does not save a copy for later. Download the record you need.

An optional flat hourly rate multiplies the paid hours by your entry. At $32 per hour, the example gives a $472 gross illustration before tax or other deductions.

The illustration displays whole dollars, rounded to the nearest dollar. The CSV retains the arithmetic amount. It excludes overtime, penalty rates, allowances and superannuation. Award coverage and minimum engagements need a separate entitlement calculation.

The Fair Work Ombudsman’s record-keeping guidance explains employers’ time and wage records. This timesheet calculates entered hours and is not a complete payroll record.

Shifts across a clock change

Open UTC offsets for this shift and enter the offset at each end. Positive minutes are east of UTC; negative minutes are west. UTC itself uses zero.

The calculator subtracts each entered offset from its local timestamp before finding elapsed time. For example, 01:00 at UTC+10:00 to 04:00 at UTC+11:00 lasts two elapsed hours.

It does not select a region or look up daylight-saving transitions. A repeated or skipped local time needs a confirmed offset from the original record. The tool cannot validate that local-time and region pairing.

If the offsets cannot be established, resolve the source record before using these totals. The Reserve Bank’s daylight-saving information explains Australia’s clock changes. The Fair Work daylight-saving pay guidance explains payment by the clock when employment terms say nothing about clock changes. That can differ from elapsed hours. This calculator keeps elapsed-time arithmetic separate from that entitlement decision.