Digital product passports and catalogue data in 2026

Prepare data for digital product passports. Understand identifiers, supplier evidence and access controls without assuming every product is covered.

A digital product passport is structured product information tied to a unique identifier and accessed through a data carrier, such as a QR code. Retailers can prepare by matching catalogue records to supplier evidence and controlling who can use each fact. The applicable product rules determine whether a passport is required.

Define the passport and its scope

A digital product passport connects a physical product with information about that product. A scan leads to its digital record, where the reader’s access rights determine which information they can see. The information must describe the correct model, batch or individual item.

The European Union’s Ecodesign for Sustainable Products Regulation (ESPR) establishes a framework for product requirements. Its digital product passport rules leave product-specific delegated acts to specify the required data, access rights and level of identification. A delegated act adds detailed rules under the framework law.

Separate legislation also covers particular sectors. The European Commission’s passport overview identifies the Batteries Regulation and Construction Products Regulation among them. Treat each sector’s requirements separately when deciding which records to prepare.

A supplier can also provide a voluntary passport or ask you to join a traceability project. Ask which law or commercial agreement supports the request. A supplier’s pilot does not establish a legal deadline for every retailer.

Identify the products and duties that apply

Check passport duties for the product’s category, destination market and your role in supplying it. An Australian business supplying the EU market needs a different assessment from one selling the same goods only in Australia. A product’s manufacturing location alone does not settle the question.

For each product family, work through these checks:

  1. Record the product category and technical characteristics used to classify it. Include capacity where a battery threshold depends on it.
  2. Identify the destination market and the operator placing the product on that market. Record whether your business manufactures, imports or distributes it.
  3. Find the enacted product rules and any applicable delegated or implementing acts. Keep consultation drafts and supplier proposals in a separate status.
  4. Record the application conditions and the official deadline reference. Assign someone to review changes to that source.

The Commission’s passport FAQ explains that inclusion in the ESPR working plan does not itself make a passport mandatory. An indicative rulemaking year is different from the date a business must comply.

Batteries give a documented category example. Article 77 of the EU Batteries Regulation covers light means of transport batteries, electric vehicle batteries and industrial batteries above 2 kWh. The obligation covers batteries placed on the market or put into service once the provision applies. Read that boundary in the legislation before classifying stock.

The operator placing the battery on the market or putting it into service must ensure the passport information is accurate, complete and updated. The Commission’s battery passport guidance explains that written authorisation to another operator does not transfer ultimate responsibility.

For an e-bike battery, record the finished battery’s classification and responsible operator before requesting its passport. Do not apply the industrial-battery capacity threshold to every battery category.

Map passport data to catalogue records

Map passport information to your product information management (PIM) system by separating shared product facts from batch and individual-item records. Keep your internal stock keeping unit (SKU) alongside the supplier’s identifiers so a catalogue import cannot silently join different products.

Use the following as a preparation map, then adapt it to the applicable product requirements. These fields are not a universal legal passport specification.

InformationCatalogue recordEvidence and access to retain
Product identityBrand, supplier model, SKU and Global Trade Item Number (GTIN)Identifier owner and the supplier’s model mapping
Material compositionNamed material, component and applicable variantSupplier specification, version and permission to publish
Recycled contentPercentage, material and the part it describesSupporting declaration and calculation basis
Care and repairApproved instructions and compatible spare partsManual version and any restrictions on technical documents
Batch or item factsSeparate batch or serial record linked to the modelApplicable production evidence or item history, with access controls
Passport referenceIdentifier, destination and responsible operatorLink owner, applicable product scope and update contact

GS1 Digital Link puts GS1 identifiers into web addresses. Its URI syntax standard shows a GTIN with a batch qualifier or serial number. A QR code can carry that address to connect the scan to online information.

A GTIN alone does not supply the passport’s required facts or identify an individual unit. For a serialised product, preserve the relationship between its GTIN and serial number. Confirm that the selected identifier and carrier meet the applicable product rules before printing labels.

Keep public care instructions apart from restricted technical documents and item histories. A shared product page must not expose every record attached to an identifier. The battery passport, for example, has different access levels for public information and restricted information.

Request supplier information with provenance

Ask suppliers for values with their evidence and permitted uses, so your team can trace a catalogue claim back to its source. Send a request for a named product family and list the exact models it covers.

A practical supplier request asks for the following information:

  • Supply your model identifiers and GTINs, plus batch or serial identifiers where applicable. Map each one to our listed SKUs.
  • Identify the applicable product legislation and your role in supplying the destination market. State whether your passport request is mandatory or voluntary.
  • Provide the declarations and supporting documents that apply to these models. State each document’s version and the products or components it covers.
  • For each material or recycled-content value, explain what the value measures and provide its supporting evidence.
  • Mark which values and documents we can publish. Identify restricted records and the permitted users.
  • Name the contact who corrects supplied information. Explain how you will notify us when a value, document or passport destination changes.

Retain the supplier, source document, version and permitted access level beside every supplied value. Record who approved it for catalogue use. A replacement document must trigger a review of the values derived from the previous version.

For example, a recycled-content declaration for an outer casing does not justify the same percentage for the whole appliance. Store the component scope with the percentage so later exports cannot drop that qualification.

Use verified facts in shopper support

Answer shoppers’ material, care and repair questions from approved catalogue facts and the documents that support them. Match the answer to the exact product variant and preserve conditions from the source.

In a hypothetical catalogue, a bag’s approved care sheet says to wipe the outer fabric with a damp cloth. A shopper asks whether the bag is machine washable. Give the supported care instruction and avoid inferring machine washability from the fabric name.

Repair questions need the same discipline. Match a spare-part reference to the supported model or batch before suggesting it. A part that looks similar in a product photograph does not establish compatibility.

Keep passport retrieval separate from the facts used for shopping assistance. If a passport link fails, flag the retrieval problem for its owner. Continue using separately approved facts where they remain valid, without inventing the missing passport content.

When the missing record is needed to establish a required fact, route the question to the responsible team. A broken link cannot establish repairability, recycled content or legal conformity.

Prepare systems without premature promises

Pilot one product family with known suppliers before describing your whole catalogue as passport-ready. Choose a family with stable model identifiers and documents your team can trace to individual fields.

Assign the supplier contact to document corrections, the catalogue owner to field approval and the technical owner to identifier mapping and access controls. Keep a named compliance owner for deciding which product rules apply. Hosting a record and registering its reference are separate tasks.

The Commission’s battery guidance distinguishes the passport’s data from registration in the DPP registry. A registry reference does not replace the underlying product record. Keep both references in the pilot where the applicable rules require them.

Test a supplier correction before expanding the pilot. In a hypothetical case, a supplier revises a model’s material specification. Confirm whether the change covers every unit or only later batches, then update the affected catalogue fields and documents.

Check the product page, shopper-support answer and passport reference after that correction. Each must point to the applicable version without exposing restricted records. If the versions disagree, correct the mapping and repeat the check before adding the next product family.

Give your store its own shopping agent

Customers ask in their own words. Your agent finds, compares and checks out from your catalogue, right on your site.

See it in actionFree trial · Simple setup