Room planner

Arrange measured furniture in a 2D room plan and inspect the same layout in geometric 3D. Your measurements and saved projects stay on your device.

Draw your room

Edit walls and openings

One x, y point per line, in your selected unit. Last joins first.

Opening 1

Opening type

Arrange furniture

Furniture to edit

Compare rug sizes

Rug shown in both views
Edit rug A
Edit rug B
Optional placement rules

Keep your layout

Free 2D and 3D planning. Save and export without an account. Photos are unnecessary.

Measured furniture fit

Inside room

Uses entered dimensions. Doorway squares reserve one opening-width inside the room.

Inside room. Sofa to coffee table: 300 millimetres.

Your measured layout

Layout view
Rug A12door 900 mm @ 600 mm5,000 mm4,000 mm5,000 mm4,000 mm1000 mm scale

Wall 1: 5,000 mm; wall 2: 4,000 mm; wall 3: 5,000 mm; wall 4: 4,000 mm.

Selected edge clearance to Coffee table: 300 mm.

  • Furniture is inside the room without overlap.
Selected furniture and rug comparison
RugLegs on rugAfter pull-out
Rug A2 of 4 legsChoose a chair
Rug B4 of 4 legsChoose a chair

Draw a measured room

This room planner checks a measured furniture arrangement against your room outline. Start with the editable 5,000 by 4,000 mm living room.

Enter room width and depth, then press Apply rectangle. Join rectangular area adds a connected wing at the top-right corner.

Open Edit walls and openings to move individual wall points. Each line is an x, y corner, measured from the plan’s top-left origin. The last corner joins the first.

Choose furniture and drag its footprint, or enter its centre coordinates. Move buttons adjust it by 50 mm. Undo edit restores the previous change.

Enter dimensions and keep the plan to scale

Choose millimetres, centimetres, metres, inches or feet. Stored measurements remain unchanged when you switch display units.

One inch is exactly 25.4 mm and one international foot is 304.8 mm, as defined in the NIST unit conversion guide.

The plan shows wall lengths and a 1,000 mm scale bar. Furniture width, depth and height stay separate from its centre position and rotation.

Opening offsets run from the first point of the selected wall to the start of the opening. Wall 1 joins the first two points.

Arrange furniture and inspect clearance

The starting sofa is 2,400 by 1,000 mm, centred at 2,500, 1,100 mm. A 1,200 by 600 mm coffee table sits at centre coordinates 2,500, 2,200 mm.

Their nearest edges are 300 mm apart. Moving the table down 50 mm increases that gap to 350 mm.

Wall 3 has a 900 mm doorway starting 600 mm from its first point. A dashed square reserves 900 mm inside the room for a separate doorway warning.

Warnings identify furniture overlap and footprints outside the room. Clearance is the shortest edge-to-edge distance from the selected item to another item.

Both rugs share a centre at 2,500, 2,200 mm. Rug A is 2,400 by 2,000 mm, with vertical edges at 1,300 and 3,700 mm.

Its horizontal edges are at 1,200 and 3,200 mm. Two sofa legs lie on Rug A when the legs are inset 100 mm from each corner.

Rug B is 3,000 by 3,400 mm, with edges at 1,000 and 4,000 mm horizontally, and 500 and 3,900 mm vertically. All four sofa legs lie on it.

Choose Dining room to compare a chair’s footprint after the entered pull-out distance. At 600 mm, the chair extends beyond Rug A and remains inside Rug B.

In Bedroom, the 2,000 by 1,800 mm rug extends 200 mm beside the bed but ends 100 mm short at its head and foot. The 2,600 mm square rug extends 500 mm beside it and 300 mm at each end.

These are editable examples. Temple & Webster’s rug guide distinguishes living-room leg placement, bed positioning and room for dining chairs.

Leg dots use four corner positions with your entered inset. These geometric checks establish which points and footprints lie within a rug. They do not establish its appearance or installation safety.

Inspect the layout in 2D and 3D

Switch to 3D view to orbit a geometric scene built from the same walls, openings and furniture dimensions. Drag to orbit, pinch to zoom or use the orbit and zoom buttons.

Focus the 3D view to use arrow keys and + or - instead. Return to 2D plan to continue moving furniture without losing your edits.

Furniture is shown as plain blocks at the entered height. Materials and product likeness need a separate appearance preview.

To recreate a layout from Planora, Roomstyler, Mydeco or Planner 5D, re-enter its measured room and object dimensions. This planner does not connect accounts or import their projects.

Use the complete planner free online

The 2D editor, geometric 3D view and furniture controls are free. Local saving and every export are included without payment, registration or a subscription.

Your browser processes the measurements on your device. You can plan from dimensions without uploading a photo or generating an image.

Use the planner on desktop or iPad

Open this page in your desktop or iPad browser. Tap the numeric controls to enter measurements, or drag furniture in the plan.

The planner is a browser application. It does not require an App Store download.

Save on this device keeps the editable layout in this browser. Reopen saved layout restores it after a reload. Download project keeps a separate JSON file you can reopen through Open project file.

Browser storage can be cleared or unavailable in private browsing. Download the project file when you need a copy outside that browser.

Plan living rooms, bathrooms and laundries

Living room and Family room start with seating, a coffee table and a door. Dining room and Bedroom include their own furniture and rug examples.

Bathroom and Laundry use generic fixture or appliance footprints. Replace every example dimension with the measurements of your room and products.

These arrangements support retail space discussions. Plumbing, electrical and structural work need their own design and compliance checks.

Press Keep before layout before making changes. Compare before layout toggles its dashed furniture outlines beneath the edited plan. Saving a project retains both layouts.

Check optional feng shui placement rules

Enable Show entrance and compass to mark an entrance and north direction. Enter the entrance coordinates and north’s clockwise angle from the plan’s top edge.

The optional observations apply explicit command-position conventions to the selected seat or desk. Its front is the positive depth direction before rotation.

Facing entrance means the entrance is in front of that item. Direct alignment means the entrance falls within the item’s width when viewed along that direction.

A backed position means the centre of the item’s back edge lies within 150 mm of a wall. The observations favour facing the entrance without direct alignment, with that wall behind.

These are optional placement conventions, separate from fit and clearance. They make no health, fortune or certified-design claim. Compass direction marks orientation without changing those geometric rules.

Save a layout for the product conversation

Use product names and stocked rug variant labels before saving. Download plan image exports a dimensioned SVG, while Download printable plan saves an HTML plan you can open and print.

Download project retains editable measurements, both rug sizes and the active selection. Keep before layout adds a before-and-after comparison to that file.

You can recreate a BHG-style plan by entering its wall and furniture dimensions with your own labels. A BHG catalogue or project import is outside this planner.

Keep the product’s exact measurements beside the saved layout. Check delivery access and the product’s installation requirements separately.

What this room planner can establish

The 2D plan and 3D geometry show the arrangement implied by the supplied measurements. They calculate footprints, rotation and clearance without generating a room style.

A photographic appearance preview answers a different question about how a product looks. It cannot supply accurate room measurements for this plan.

This planner does not certify measurement accuracy, delivery access, safe installation or building compliance. Confirm those requirements before ordering or carrying out work.