Backpack size guide by declared torso measurements
Compare torso length with Osprey’s adult harness-size ranges.
Listed harness size
S/M or L/XL
A listed size needs a loaded fitting trial.
S/M or L/XL. Both ranges include 50 cm.
Selected reference
Osprey adult men’s two-size chart
| Harness size | Torso length |
|---|---|
| S/M | 43 to 52 cm |
| L/XL | 49 to 58.5 cm |
S/M: 43 to 52 cm. L/XL: 49 to 58.5 cm.
Overlap: both ranges include your measurement.
Method: C7 vertebra to iliac crest.
Measure the torso for the selected chart
This backpack size guide shows every listed harness size whose torso interval includes your measurement. Choose the chart named on the actual pack.
For Osprey’s method, find C7, the prominent bone at the base of your neck. Lower your chin to locate it, then stand naturally.
Find the iliac crest at the top of your hip bones. Ask someone to measure down your back from C7 to that level.
Record that torso length. Overall height measures from head to foot and cannot replace it.
The lookup uses Osprey’s adult two-size fit profiles. One-size packs, youth packs and vest-style packs use separate charts.
Read the harness range
The fictional example uses 50 cm in the men’s chart. S/M spans 43 to 52 cm and L/XL spans 49 to 58.5 cm, so both match.
Both endpoints count. At 49 cm and 52 cm, both sizes appear. Below 49 cm, only S/M matches until its lower boundary.
At 59 cm, neither interval matches. The result says “No listed size” and keeps the selected chart visible. It never chooses the nearest size.
Inches convert to centimetres by multiplying by 2.54. The lookup always compares with the printed metric intervals shown beside the result.
Osprey’s inch column contains rounded equivalents. A result near an endpoint can differ if you compare directly with that column.
A hiking backpack size guide separates harness fit from capacity. A 65-litre bag describes storage space. Its harness size describes a body measurement range.
Check the actual pack
Confirm the model’s own size range before trying the pack. A general chart match does not establish comfort or how much you can carry.
Where the model allows it, adjust the torso length to your measurement. Some packs have fixed torso lengths, so adjustment cannot replace selecting a suitable size.
Check the hip belt separately around the top of your hip bones. Its padding must sit over the hips and tighten without reaching its limit.
Check the model’s intended load against what you plan to carry. Litre capacity alone gives no personal lifting limit.
Try the actual pack with a representative load within the model’s limits. Adjust its straps, then walk and check for slipping, gaps or pressure.
Osprey’s pack fitting instructions show the strap sequence and shoulder checks. If adjustment leaves poor contact or painful pressure, try another size or model with a pack fitter.