Unit converter for product measurements
Convert product measurements between metric, US customary and imperial units.
Converted value
31.75 cm
12.5 inches converts to 31.75 centimetres.
Conversion rule
Result = value × 0.0254 ÷ 0.01
Original: 12.5 in
Up to 2 decimal places
Choose the measurement and unit system
This unit converter changes a measurement into another unit of the same quantity. Choose length, area, mass, volume or temperature, then enter the supplier’s value and select the units.
The unit lists stay within your chosen category. A length cannot convert to an area, and a liquid volume cannot convert directly to a product’s mass.
Choose the supplier’s liquid unit carefully. A US liquid gallon contains about 3.79 litres, while an imperial gallon contains about 4.55 litres. US fluid ounces and imperial fluid ounces also differ.
Ounces of mass belong under Mass. Fluid ounces belong under Volume. The mass units use the ordinary avoirdupois pound and ounce, which differ from troy units used for precious metals.
How each conversion is calculated
Length, area, mass and volume use fixed scaling factors. The tool multiplies your value by its source-unit factor, then divides by the destination-unit factor.
The conversion rule shows those factors in metres, square metres, kilograms or litres. The definitions follow NIST’s conversion tables and the BIPM SI Brochure.
Temperature also needs an offset. Celsius to Fahrenheit uses °F = °C × 9 ÷ 5 + 32. Kelvin equals Celsius plus 273.15. These are temperature readings, not changes in temperature.
Converting volume to mass requires the material’s density: mass equals volume multiplied by density. A litre of one product can have a different mass from a litre of another.
Calculations keep full numerical precision. Choose up to two decimal places for the displayed result. Trailing zeros are omitted. A nonzero result too small for the chosen rounding uses scientific notation with two significant figures.
Convert a supplier measurement
For a hypothetical shelf depth of 12.5 inches, choose Length, Inches and Centimetres. The calculation is 12.5 × 2.54 = 31.75 centimetres. These are the tool’s starting values.
For a product mass of 8.5 pounds, choose Mass, Pounds and Kilograms. The unrounded calculation is 8.5 × 0.45359237 = 3.855535145 kilograms. At two decimal places, the tool shows 3.86 kg.
Changing the rounding changes only the displayed value. Keep the original measurement when you need to calculate again, so repeated conversions do not compound rounding.
Use converted values in your catalogue
Retain the supplier’s original value and unit alongside the converted figure. Label a converted dimension with its unit, such as “Depth: 31.75 cm”, so customers can compare products.
A nominal product size is a naming convention and can differ from the measured dimension. Use the supplier’s actual measurement for fit or clearance. Converting a nominal label does not establish the physical size.
Keep separate fields for product dimensions, packed dimensions and mass. Use the cubic weight calculator when you need to compare packed volume with a carrier’s chargeable weight.