Balloon size guide by diameter and shape

Convert balloon dimensions and compare the selected shape’s nominal size.

Balloon reference

Measurement basis

Converts stated dimensions only.

Stated dimensions

Units

Enter 0.01 to 1,000 in the selected unit.

Converted dimensions

30.48 cm

30.48 cm. Inflated measurement.

Compare the stated size

Alternate units
12 inches
Measurement basis
Inflated measurement
Reference product
Sempertex R12 round
Catalogue size
12 inches / 30 cm

Catalogue labels are nominal. Compare the same measurement basis.

Identify the balloon measurement

A balloon size guide must distinguish a diameter from a shape’s width and height. Keep the measurement basis with every dimension you compare.

An inflated diameter measures across the balloon. Flat dimensions measure the uninflated item laid out. A printed size is the maker’s nominal product label.

Select the basis that matches your product information. Converting a flat measurement preserves that flat measurement. It cannot establish the inflated width or height.

The Sempertex catalogue lists R12 round balloons at 12 inches and 30 cm. Those are nominal labels, so the tool preserves both alongside your exact unit conversion.

Convert the stated dimensions

Multiply inches by 2.54 to get centimetres. Divide centimetres by 2.54 to get inches, using the NIST length conversion factor.

The opening example converts a 12-inch diameter to 30.48 cm. The maker’s 30 cm nominal label remains separate. That difference supplies no instruction to inflate further.

Anagram’s product drawings list Orbz Gold 28205 at 15 inches wide by 16 inches high, with quoted metric dimensions of 38 by 40 cm.

Select Anagram Orbz Gold and enter 15 for width and 16 for height in inches. The tool converts those dimensions to 38.1 by 40.64 cm.

The catalogue’s rounded dimensions remain unchanged in the comparison. For another shape, select Other shape and enter both dimensions. The tool converts them and states that it has no shape reference.

Follow the product fill instructions

Use the balloon maker’s fill instructions for the exact product. A dimensional conversion provides no fill pressure, gas quantity or safety rating.

The selected reference identifies one product’s nominal dimensions. It supplies no inflation limit for another material or shape, even when the printed size looks similar.

For a foil number, letter or irregular shape, keep every dimension from its product drawing. A single printed size cannot supply a missing width, height or depth.

Follow the product’s handling warnings separately. Compare like measurements when buying, then use the exact product’s instructions when filling it.