Bracelet size guide from your measured wrist

Add your chosen allowance to a measured wrist for a reference bracelet length.

Your measurements

Measurement unit

Measure just above the wrist bone, without adding extra room.

Extra length you choose. Enter zero to compare with your wrist alone.

Reference length

18.5 cm

7.28 inches

Reference bracelet length 18.5 cm, from a 16.5 cm wrist and 2 cm chosen allowance.

Applied measurements

Measured wrist

16.5 cm

Chosen allowance

2 cm

Flexible bracelet reference only. Compare it with the selected design’s sizing method.

Measure the wrist and select an allowance

This bracelet size guide adds your chosen allowance to your measured wrist. The result is a reference length for a flexible bracelet.

Follow Pandora’s wrist-measuring instructions: hold your palm open and facing up, then wrap a soft tape just above the wrist bone. Read the circumference where the ends meet.

Keep the tape against the skin without adding wearing room to the reading. Enter that measurement first, then enter the extra length you want separately.

The example uses 2 cm of allowance, following Pandora’s general convention. You can change it, including to zero. Each bracelet type has its own sizing guidance.

A guide for a female wrist does not establish one bracelet size for all women. Use the customer’s measurement. A wide bracelet or added charms can change how the same length feels.

Read the calculated bracelet length

In the fictional example, a 16.5 cm wrist plus a chosen 2 cm allowance gives an 18.5 cm reference. That is 18.5 divided by 2.54, displayed as 7.28 inches.

One inch is exactly 2.54 cm. Switching units converts both entries and preserves the underlying measurements. Display rounding never selects a product size.

Pandora’s Moments Silver Charm Bracelet chart lists lengths of 16, 17, 18, 19, 20, 21 and 23 cm. It has no 18.5 cm entry.

The 18 cm and 19 cm chart lengths sit either side of the example result. These are published chart lengths, not a live stock list. This calculator keeps 18.5 cm as the reference.

Compare the selected bracelet’s actual length options and measurement method before choosing. Establish whether its stated length includes the clasp. A removable link changes length in that link’s increment.

For an adjustable bracelet, compare the usable fastening range with the reference. An extender’s full length does not mean every point along it can fasten.

Measure rigid bangles by their own method

A closed rigid bangle must pass over the hand. Its opening needs a separate measurement from a flexible bracelet that opens at a clasp.

Kailis’s closed-bangle measuring method brings the fingers together and the thumb towards the little finger. Wrap a soft tape around the widest part of that hand position and record the hand circumference.

Use the chosen bangle’s own chart to interpret that measurement. If a product lists an internal diameter, follow its diameter method. Keep diameter and circumference labelled separately.

A hinged bangle opens, so its maker can specify a different method from a closed slip-on design. The flexible-bracelet result above does not calculate either bangle opening or guarantee a fit.

For customer guidance, keep the measured wrist, chosen allowance and named bracelet design together. Record a closed bangle’s hand measurement separately.