Curtain size guide by track width and declared fullness

Calculate flat panel widths from your track span and fullness, keeping the drop’s measurement points explicit.

Width and fullness

Measurement units

End to end, excluding decorative finials.

Use your product’s required factor.

Individual curtains, not packs.

Drop measurement

From the selected start to your chosen hem.

Lengths up to 10 metres. Fullness from 1 to 4. Up to 20 equal panels.

Minimum total flat width

360 cm

Panel dimensions

Width per panel

180 cm

Requested drop

220 cm

Curtain top to your chosen hem position. 2 equal panels at 2 times fullness.

Widths round up to whole units. The drop keeps your entry. No extra allowances are added.

360 cm total flat width. Curtain top to your chosen hem position. 2 equal panels at 2 times fullness.

Measure the intended hanging position

This curtain size guide multiplies the usable track or pole span by your declared fullness factor. It divides that flat width between equal panels and keeps your measured drop.

Measure the fitted track from end to end, or the pole between its decorative finials. A window opening measures the glass or frame. Its width leaves out space where curtains stack beside it.

Dunelm’s curtain measuring guide uses the full pole or track span and excludes finials. Its standard gather uses twice the pole width.

Choose where the drop starts before measuring down to the intended hem. That endpoint can sit above the sill or floor, below the sill or at your chosen pooling position.

Curtain top means the finished fabric’s upper edge. Ring eye means the curtain hook’s hanging point on the ring. Track top and Pole top mean the hardware’s upper edge.

The tool preserves that distance under every start convention. It adds nothing above the start and subtracts nothing at the hem. Include your desired floor clearance when you measure.

For eyelets, fabric can extend above the pole. Pillow Talk’s curtains buying guide adds 2 cm for its eyelet lip. That is a product convention, not a universal allowance.

If a retailer needs the full top-to-hem length, include its specified extension above the hanging point, then select Curtain top. Record the hardware-to-hem measurement separately.

Calculate width and panel dimensions

Total flat finished width equals track span multiplied by fullness. Width per panel equals that total divided by the number of individual panels.

In the fictional example, a 180 cm pole at 2 times fullness needs 360 cm of flat finished width. Two equal panels each need 180 cm.

The example’s 220 cm drop runs from the curtain top to the chosen hem. Each panel therefore has a target flat size of 180 cm wide by 220 cm long.

Flat finished width measures the hemmed curtain spread out before gathering. Gathered coverage is the space it covers on the track after folds form. A 2 times factor halves that coverage.

The tool rounds each width upwards to a whole selected unit. A 181 cm span at 2.5 times fullness needs 452.5 cm in total, displayed as 453 cm.

Dividing that unrounded total into three panels gives about 150.83 cm each, displayed as 151 cm. Those three rounded panels total 453 cm. Other panel counts can add more rounding surplus.

The drop keeps the entered value, including decimals. The tool never selects a longer ready-made drop. A zero span, drop, fullness or panel count cannot produce dimensions.

One inch is exactly 2.54 cm, and one centimetre is 10 mm. Changing units converts the existing lengths. It does not reinterpret 180 cm as 180 inches.

These are finished dimensions. Fabric cutting also needs the maker’s seam and hem allowances, heading construction and any pattern repeat. Add returns or centre overlap only under the supplier’s method.

Check the product and heading

Match the result to the retailer’s dimension convention before ordering. A label can describe one flat panel, a whole pair or the track coverage after pleating.

Pillow Talk states that its pack contains a pair and its size describes one curtain lying flat. For that convention, compare Width per panel with the pack’s stated width.

Curtains on the Net’s measurement guide instead lists its ready-made pencil pleats by the track width the pair covers. Its custom service adds fullness itself.

For a coverage-based or custom measurement, send the measured track span and requested drop in the supplier’s format. Multiplying that order width by fullness again would count gathering twice.

Check the heading against your hardware. Eyelets slide onto a compatible pole. Pencil pleats use suitable hooks with a track or rings. Wave and S-fold systems need their matching hardware and specified fullness.

Confirm lining dimensions separately. Dunelm’s lining size guide lists lining drops shorter than the main curtains so the lining stays hidden.

Check the actual product’s manufacturing tolerance, care-related shrinkage and whether width is measured flat or already headed. This calculation adds no tolerance and makes no claim about installation suitability.

Before you order, match the panel count to the pack quantity and compare the finished drop from the same start point. Keep the supplier’s heading and lining instructions with those measurements.