Dog harness size guide by chest and neck measurement

Compare chest and neck measurements with two product-specific harness charts.

Dog measurements

Measurement unit

Measure around the chest just behind the front legs.

Measure around the neck where a collar sits.

EzyDog Quick Fit and Rabbitgoo ControlPro charts.

Listed harness sizes

S or M

2 listed ranges include both measurements.

Both endpoints count. No measuring allowance is added.

S or M. Both measurements are included.

Your measurements by size

Chest and neck checks for each listed size
SizeChestNeck
XXSAbove maximumAbove maximum
XSAbove maximumWithin range
SWithin rangeWithin range
MWithin rangeWithin range
LBelow minimumBelow minimum
XLBelow minimumBelow minimum

Selected chart intervals

EzyDog Quick Fit harness

Published chest and neck intervals in centimetres
SizeChestNeck
XXS30 to 38 cm23 to 38 cm
XS38 to 46 cm28 to 46 cm
S46 to 55 cm36 to 56 cm
M55 to 67 cm41 to 69 cm
L67 to 84 cm45 to 79 cm
XL84 to 107 cm53 to 91 cm

Take the harness measurements

This dog harness size guide finds the listed sizes that contain both chest and neck measurements. Select the chart for the exact harness you’re considering.

For EzyDog Quick Fit, measure chest girth directly behind the front legs. Measure the neck where a collar sits.

Rabbitgoo’s ControlPro guide uses the lower neck where the harness neckline sits. Measure the widest chest just behind the front legs while your dog stands naturally.

Rabbitgoo says to keep the tape snug without pressing into the coat or skin. Enter the measured circumferences. This lookup adds no extra centimetres to either chart.

Keep the chart’s measuring method when changing products. A collar-line neck measurement and a lower-neck measurement can differ.

Read the supported intervals

A size appears only when both measurements fall inside the same row. The printed minimum and maximum both count.

The fictional example uses a 55 cm chest and 42 cm neck in EzyDog’s chart. Both S and M include these measurements.

At the chest boundary, S ends at 55 cm and M starts at 55 cm. Increasing the chest to 55.01 cm leaves M as the match.

A 35 cm chest and 60 cm neck give “No listed size”. The chest fits XXS, but its neck range ends at 38 cm.

The lookup keeps that mismatch visible for each size. It never chooses the closest size or joins one size’s chest range to another size’s neck range.

All comparisons use the printed centimetre intervals. Inches convert by multiplying by 2.54 before comparison, without rounding the measurement into a range.

The intervals describe the chart’s adjustment limits. An endpoint match leaves no listed room in that direction, so compare the actual harness’s adjustment before buying.

Check the fitted harness

A chart match establishes dimensional compatibility only. Secure adjustment and actual comfort need a fitting check on your dog.

Rabbitgoo’s fitting guide calls for about two fingers beneath each strap after adjustment. This is a strap check, not a fixed length to add to your measurements.

Follow the selected harness’s fitting instructions. Check its position and adjustment as your dog moves, and recheck after walking or turning.

If a strap reaches its adjustment limit while the harness remains loose or tight, try another size or model. An overlapping chart result leaves both options to assess.

The lookup cannot establish escape prevention or safe restraint. It gives no assessment of veterinary suitability.