Dryer size guide by load and installation dimensions
Compare a dry laundry load and measured space with listed dryer sizes and clearances.
Load and space matches
0 of 2 match
Selected reference: DE7060G2
Load rating margin
0.5 kg spare
Cabinet alone
Fits cabinet
| Direction | Available | Required | Margin |
|---|---|---|---|
| Width | 650 mm | 640 mm | 10 mm spare |
| Height | 900 mm | 850 mm | 50 mm spare |
| Depth | 620 mm | 650 mm | 30 mm short |
Unmet space: Depth.
Both dryer references
| Model | Dry load | With clearances |
|---|---|---|
| DE6060M2 | 0.5 kg over | Depth short |
| DE7060G2 | Within rating | Depth short |
Declared limits only. Programme choice and full installation conditions need separate checks.
0 of 2 match. DE7060G2: 0.5 kg spare. Space short in Depth.
Separate load rating and cabinet size
A dryer size guide needs two separate comparisons. Match your dry laundry weight to the load rating, then compare the external dryer dimensions plus required clearances with your space.
Fisher & Paykel defines capacity as the maximum dry weight of items. A 7 kg rating means the weight before washing. Some drying programmes have lower limits.
The listed DE6060M2 reference has a 6 kg rating. The DE7060G2 reference has a 7 kg rating. Both product pages state 600 mm width, 830 mm height and 575 mm depth.
That shared cabinet size shows why kilograms cannot predict physical size. The tool uses those product-page dimensions, which are larger than the family manuals’ nominal height and depth.
The two installation guides specify 20 mm around the freestanding dryer and 75 mm behind it. This comparison allows 20 mm at each side and above. Window ducting uses the guides’ larger 140 mm rear distance.
A match means the entered load and rectangular space meet these compared figures. Fabric care, programme limits and installation conditions still decide whether you can use the dryer there.
Compare a laundry-space example
The fictional laundry example starts with a 6.5 kg dry load and a space 650 mm wide, 900 mm high and 620 mm deep. The selected reference is the 7 kg DE7060G2 with front venting.
The closed cabinet fits all entered dimensions. Its 575 mm depth leaves 45 mm behind it, which falls 30 mm short of the stated 75 mm rear clearance.
| Direction | Required space | Remaining space |
|---|---|---|
| Width | 600 + 20 + 20 = 640 mm | 10 mm spare |
| Height | 830 + 20 = 850 mm | 50 mm spare |
| Depth | 575 + 75 = 650 mm | 30 mm short |
Neither reference meets both requirements in this space. The 6 kg reference also has a 0.5 kg load shortfall. The 7 kg reference has 0.5 kg spare capacity against its maximum rating.
Change available depth to 650 mm and the 7 kg reference meets the compared figures. Its depth margin is exactly zero. Window ducting increases required depth to 715 mm, so the same space becomes 65 mm short.
Measure the smallest usable width and height. For depth, measure from the rear wall to the furthest allowed closed front. Account for skirting and fittings, then check the door opening and delivery path separately.
Verify installation conditions
Use the actual model’s instructions for venting and every installation connection. The DE6060M family installation guide and DE7060G family installation guide explain the arrangements used here.
Front venting needs adequate room ventilation. The window-duct option reserves the guides’ rear space, but the arithmetic does not check the duct route or bends. Keep the door free to open fully.
These two references are vented dryers. If you choose a condenser or heat-pump dryer, use its own drainage instructions for a collection tank or drain hose. The vented references’ gaps do not transfer to another model.
For stacking or wall mounting, confirm the permitted appliance combination, approved kit and support requirements in the relevant instructions. This freestanding comparison cannot assess a mounting surface or stack.
Check the electrical supply and accessible socket against the rating plate and installation guide. A numerical space match cannot confirm electrical compatibility. Capacity alone also cannot predict running costs.