Fishing hook size guide by pattern and dimensions

Look up hook length and gape in named Ahrex pattern charts.

Choose a chart and size

Sizes shown belong to the selected pattern chart.

Display units

Length × gape

16.85 × 6 mm

Ahrex FW500/501 Dry Fly Traditional · #10

Ahrex FW500/501 Dry Fly Traditional, #10. Length 16.85 mm, gape 6 mm.

Supported sizes

Ahrex FW500/501 Dry Fly Traditional

Hook dimensions in the selected pattern chart
Nominal sizeLengthGape
#189.55 mm3.23 mm
#1611.7 mm3.66 mm
#1413.2 mm4.31 mm
#1214.5 mm5.05 mm
#1016.85 mm6 mm
#819 mm7 mm

Open the HTML file and use your browser’s Print command.

Published dimensions only. Nominal sizes do not establish strength or suitable catch.

Choose the hook pattern and chart

This fishing hook size guide looks up length and gape in two named Ahrex charts. Select the pattern before comparing a numbered or aught label.

The FW500/501 Dry Fly Traditional chart covers #18 to #8. The SA220 Streamer chart covers #10 to 1/0.

Ahrex defines hook length as the distance from the front of the eye to the back of the bend. Gape is the distance between the hook point and the shank.

These are separate dimensions. Shank length measures the tying section behind the eye and ends where the shank starts bending. It is shorter than overall hook length.

Ahrex’s hook anatomy guide explains these measurement points. Its numbered sizes grow as the number falls, while aught sizes grow as the number before /0 rises.

A nominal label is relative to its model. The same #10 label produces different dimensions in these two charts.

Compare the dimensions

In a fictional shopping example, you compare #10 hooks. FW500/501 #10 is 16.85 mm long with a 6 mm gape. Its neighbouring rows are #12 at 14.5 mm × 5.05 mm and #8 at 19 mm × 7 mm.

Switching to SA220 while keeping #10 gives 20.3 mm length and 6.8 mm gape. The shared label does not make the patterns equivalent.

The tool lists only published sizes for each chart. FW500/501 has no #11 or 1/0 row. SA220 has no #12 or 2/0 row. No dimensions are inferred between rows.

When changing charts, a shared size stays selected. If the new chart lacks that size, the tool selects #10. Read the pattern and size beside the result.

Inches divide each millimetre dimension by 25.4, then round the display to two decimal places. FW500/501 #10 displays 0.66 × 0.24 inches.

The printable comparison contains every supported size in the selected chart and unit. It is a table of dimensions, not a drawing to use as a physical scale.

Check the actual product

Match the maker and model code on the packet to the product’s published drawing. Then compare its length and gape with the space you need.

Wire thickness, eye direction and bend shape can differ at the same nominal label. FW500/501 and SA220 are different patterns, even where their size numbers match.

The dimension result establishes neither breaking strength nor a suitable catch. Use the exact product’s specifications and fishing guidance for those decisions.

For another maker or pattern, use that product’s own dimension chart. Keep the nominal label with its model when comparing products.