Hat size guide by head circumference

Match head circumference to named hat charts and see overlapping labels.

Enter your measurement

Measure around the head where the hat sits.

Measurement unit

Nominal hat labels

SM-MED / L-XL

57.5 cm · Flexfit 6213

Supported chart comparison

Labels containing your measurement
ChartNominal labelsContaining ranges
Flexfit 6213SM-MED / L-XL55 to 58 cm; 57 to 60 cm
Patagonia US sizedSmall/Medium21.75 to 22.75 inches
Patagonia US one sizeOne Size21.75 to 24 inches

Published endpoints are included. Overlapping labels stay separate.

57.5 cm matches SM-MED and L-XL in Flexfit 6213.

Measure for the selected hat chart

This hat size guide finds the nominal labels whose published ranges contain your head circumference. It keeps overlapping sizes visible so you can compare them.

For Flexfit, wrap a flexible tape around the widest part of your head, above the eyebrows, over the ears and around the back. Keep it level and snug without pulling it tight, following Flexfit’s measuring instructions.

Read the tape in centimetres or inches. The tool converts the measurement with exactly 2.54 centimetres per inch and compares it before display rounding.

The Flexfit 6213 chart has SM-MED at 55 to 58 cm and L-XL at 57 to 60 cm. This is a stretch-fitted cap with overlapping ranges.

The Patagonia US hat chart lists Small/Medium at 21.75 to 22.75 inches and Large/X-Large at 22.75 to 24 inches. Its separate One Size row covers 21.75 to 24 inches. Choose the row group that the product actually uses.

A fitted cap label identifies a size or stretch range. An adjustable cap also needs its closure checked within the product’s adjustment range. One Size applies only to its declared range.

Read the hat size and boundaries

In the fictional example, a head circumference of 57.5 cm falls inside both Flexfit 6213 ranges. The result shows SM-MED and L-XL together.

At exactly 57 cm, both ranges include the measurement. At 58 cm, both still include it. A reading of 58.01 cm leaves only L-XL. At 60.01 cm, neither range contains the measurement.

The same 57.5 cm example falls within Patagonia US Small/Medium. The chart comparison shows its original inch interval alongside that label.

At Patagonia’s shared 22.75-inch endpoint, both sized labels appear. The One Size option is a separate product-sizing choice, so it does not become a third size recommendation.

The chart name stays beside your circumference and result. A label from one chart cannot be transferred to another brand. Numeric fitted-hat labels also need their own published chart. This tool supports only the listed letter and One Size labels.

Results use the full measurement. Displayed numbers use up to two decimal places, so a rounded figure beside a boundary must not replace your original tape reading.

Check the style and adjustment

Check the actual hat’s material and crown shape before choosing between matching labels. Flexfit lists the 6213 as polyester with spandex and a mid-profile crown. Its stretch range does not set the fit of a rigid hat.

Try the hat in its intended position. Check for pressure around the band and whether the crown sits at a comfortable depth. For an adjustable cap, test the closure while the hat is on.

A bucket hat size guide must match that bucket hat’s own chart. Its crown depth and brim shape still need checking even when the circumference falls inside a listed range.

For a baby hat size guide in cm, use the specific baby product’s circumference chart. The adult ranges here give no baby size or age estimate. A nominal hat label cannot establish a child’s protective fit.

For protective headwear, follow the manufacturer’s fitting instructions for that exact product. This hat lookup does not assess helmet fit or protection.