Keyboard size guide by layout and dimensions

Compare real keyboard footprints and dedicated keys with the space on your desk.

Measure your desk space

Measurement unit

Leave mouse space outside this measurement.

Exclude space reserved for cables and a wrist rest.

Choose a product reference

Listed ANSI variants only. Width and depth exclude accessories.

Require dedicated keys

Six navigation keys means Insert, Delete, Home, End, Page Up and Page Down.

Selected keyboard

Meets requirements

Footprint and remaining space

Keychron K2 v2 plastic · 75% · 313 × 123 mm

Width clearance

37 mm spare

Depth clearance

57 mm spare

Physical keys

84

Your required groups

Selected keyboard key groups
GroupAccessYour choiceResult
Arrow keysDedicatedRequiredMeets
F1 to F12 rowDedicatedRequiredMeets
Six navigation keysUses FnOptionalMeets
Number padAbsentOptionalMeets

Every required group has dedicated keys.

Insert needs Fn.

Compare every reference

Keyboard references against your space and required groups
Keychron referenceWidth × depthResult
C2 full-size435.6 × 130 mmSpace short
C1 tenkeyless357 × 130 mmSpace short
K2 v2 plastic313 × 123 mmMeets requirements
K2 v2 aluminium317 × 129 mmMeets requirements
K6 non-backlit plastic313 × 104 mmKeys missing
K12 plastic293 × 102 mmKeys missing

Rectangular footprint only. Zero clearance leaves no tolerance.

Meets requirements. 37 mm spare in width, 57 mm spare in depth.

Compare layout labels and keys

A keyboard size guide needs both the physical keys and the case dimensions. A percentage describes a layout convention, while the named model determines its footprint.

Full-size keyboards usually retain a separate number pad. Tenkeyless (TKL) layouts remove that pad, while compact layouts move or combine other functions.

The Keychron C2 specification and key map show a 104-key full-size reference. Its six navigation keys sit beside the typing area, with arrows below and the number pad to the right.

Keychron’s C1 tenkeyless reference has 87 keys. It keeps the separate navigation group and arrows while omitting the number pad.

The 84-key K2 v2 has a physical F1 to F12 row and arrows in a tighter arrangement. Insert uses a function shortcut, so it fails a requirement for all six dedicated navigation keys.

The 68-key K6 non-backlit reference keeps arrows and dedicated Delete, Home, Page Up and Page Down. Insert and End need a function combination, as does F1 to F12.

On the 61-key K12 reference, arrows and navigation functions share other keys through Fn. Its number row also carries F1 to F12 shortcuts.

Tick a group when you need its dedicated physical keys. A shortcut can still perform a function, but it does not satisfy that ticked requirement.

Check the desk footprint

Compare the exact frame variant with a clear rectangle on your desk. Reserve mouse movement and cable space before measuring the width and depth you enter.

Keychron’s K2 v2 dimensions list 313 × 123 mm for the plastic frame and 317 × 129 mm for the aluminium frame. Both carry a 75% label.

The worked example uses a hypothetical 350 × 180 mm clear area and the plastic K2 v2. Requiring arrows and the F1 to F12 row leaves 37 mm across the width and 57 mm in depth.

Choose the aluminium K2 v2 with the same space and required groups. The remaining width becomes 33 mm and depth becomes 51 mm.

Reduce available width to 315 mm and the plastic frame leaves 2 mm. The aluminium frame is 2 mm too wide, even though both keyboards have the same percentage label.

Width clearance equals available width minus case width. Depth clearance equals available depth minus case depth. Both must be zero or positive, and every ticked group must be present.

A result at the space limits leaves no spare tolerance. Check a rear cable connector’s projection and wrist-rest depth separately, including the actual arrangement of items around the keyboard.

The comparison uses a keyboard square to the desk. It does not rotate the case to make it fit, or assess keyboard height beneath a tray.

Verify the chosen keyboard

A passing footprint and key-group result leaves typing feel and compatibility to a separate check. These references cover the named ANSI versions, not every regional or later model.

ANSI and ISO layouts differ in physical key shapes and positions, including Enter and the left Shift key. Compare the retailer’s exact key map with the language layout you use.

Confirm the chosen keyboard’s operating-system support and the shortcuts your applications need. Labels for Windows and Mac do not establish that every shortcut behaves identically.

Choose switches by the force and feedback you want when typing. A case-size result cannot tell you how a switch feels or sounds.

Check the exact model’s connection modes, cable requirements and your device’s ports. A keyboard that fits the desk still needs the right connection and a comfortable position.