Kitchen bin size guide for capacity and cupboard space

Compare kitchen bin dimensions and declared operating space with your measurements.

Measure your space

Measurement unit

Changing units converts your measurements.

Measure between the nearest obstructions.

Measure from the base to the lowest obstruction.

Measure clear depth behind the closed front.

Choose a bin reference

Placement: Cupboard-mounted

Selected bin comparison

Meets listed sizes

Meets listed sizes. Smallest margin: 31 mm spare.

Brabantia Built-in Bin 15 L

Declared capacity

15 L

Smallest margin

31 mm spare

Selected bin dimensions and remaining space
DimensionExternalRequiredRemaining
Width293 mm369 mm31 mm spare
Height347 mm475 mm75 mm spare
Depth300 mm302 mm48 mm spare

Maker’s minimum cupboard space

Both reference bins

Listed bin size comparisons for this space
ReferenceCapacityListed sizes
Brabantia built-in 15 L15 LMeet
Brabantia Bo Touch 36 L36 LDo not meet

Listed dimensions only. Door swing, mounting and removal access need separate checks.

Measure the bin’s full operating space

A kitchen bin fits only when its operating space clears the surrounding fittings. Compare the maker’s external dimensions and installation requirements with your usable space.

Measure the narrowest opening between hinges or pipes. Measure height from the mounting base, and depth to the back of the closed door or nearest obstruction.

External dimensions describe the closed bin. An opening lid needs extra height or sweep space. Handles and pedals can extend beyond the container.

For a cupboard bin, use the exact installation drawing. A nominal 400 mm cabinet width does not tell you its clear internal opening.

Pull-out rails and brackets occupy space around the bucket. The simplehuman pull-out setup guide shows the track base fixed to the cabinet floor. Check the full extension path and access for lifting out each bucket.

This tool compares two named references. It uses their listed rectangular requirements without tracing a door’s swing or approving the mounting surface.

Compare capacity and dimensions

The litre label describes declared capacity. It does not give a bin’s shape, opening space or the volume you can use with your chosen liner.

The Brabantia Built-in Bin 15 L data sheet lists a 293 mm wide body and a 369 mm minimum installation width. Its mounting space is wider than its container.

The example starts with a fictional cupboard measuring 400 mm wide, 550 mm high and 350 mm deep. The 15 L reference meets its listed minimums.

DimensionAvailableRequiredRemaining
Width400 mm369 mm31 mm
Height550 mm475 mm75 mm
Depth350 mm302 mm48 mm

Reduce available width to 350 mm. The 293 mm body still fits that width, but the listed mounting requirement is now 19 mm short.

Choosing the larger litre label also fails this cupboard example. The Brabantia Bo Touch Bin 36 L data sheet lists a 540 mm width, 312 mm depth and 680 mm closed height. Its in-use height is 930 mm.

In the original cupboard, the 36 L reference is 140 mm too wide and 380 mm short of lid-open height. Its extra capacity cannot resolve those shortfalls.

The Bo Touch reference is freestanding. A size comparison does not turn it into a cupboard installation. Its listed height also leaves bucket-removal access to check separately.

Check installation and liners

Match the article number and installation instructions to the bin you will buy. Colours and variants can have different dimensions, so compare the exact model.

Confirm the hinge side and door movement for a cupboard-mounted bin. Check fixing positions, the permitted mounting surface and obstructions such as a waste trap.

The tool subtracts each listed requirement from your available dimension. A negative margin is the shortfall in that direction. Equality leaves no spare space.

Keep capacity separate from liner fit. Measure the bin opening and height, then use the bin liner size guide to compare bag dimensions. A bag’s litre label alone does not establish a fit.

Before installing, open the door or lid fully and confirm that a filled inner bucket can be removed without hitting the shelf or worktop.