Luggage size guide by declared external dimensions
Compare your bag with entered dimension limits and their measurement basis.
Dimension comparison
Within limits
Within limits. No dimension exceeds the fictional reference.
Declared dimensions
Fictional size reference
Bag: Includes wheels and handles. Reference: Includes wheels and handles.
| Dimension | Bag | Limit | Result |
|---|---|---|---|
| Height | 54 cm | 55 cm | Below limit |
| Width | 35 cm | 35 cm | At limit |
| Depth | 23 cm | 23 cm | At limit |
Compare complete external measurements. This result does not approve a bag for boarding.
Each axis is checked separately. The example uses fictional limits.
Measure the complete bag
This luggage size guide compares each bag dimension with the limits you enter. Measure the packed bag in the condition you plan to carry it.
Measure height from the bottom of the wheels to the highest point with the telescopic handle packed away. Measure width across the widest side and depth from front to back, including filled outer pockets.
Follow the selected reference’s measurement instructions. Qantas’ carry-on measurement guidance includes wheels and packed-away handles in the external dimensions.
Product specifications can separate measurements from volume. Samsonite’s Essens specifications state that the height includes wheels and list litre capacity separately.
External dimensions describe the space the bag occupies. Capacity describes packing space. A 40-litre label alone cannot establish whether a bag meets height or width limits.
Choose Complete bag when wheels and handles are included. Use Bag body only when the reference also excludes them. A body-only result cannot establish the bag’s complete external size.
Compare the declared limits
Enter the reference name and its maximum height, width and depth. The result retains that name and both measurement bases beside the comparison.
The fictional example compares a 54 × 35 × 23 cm bag with entered limits of 55 × 35 × 23 cm. Height is below its limit. Width and depth are exactly at their limits, so the result reads Within limits.
Change bag height to 55 cm and all dimensions equal their limits. At 55.1 cm, height alone exceeds its limit and the result reads Exceeds limits. Spare room on another axis cannot cancel that excess.
Choose centimetres, millimetres or inches separately for the bag and reference. Each unit applies to the numbers in its own section. Changing the unit changes how those numbers are interpreted and leaves the field values in place.
For example, 550 mm equals 55 cm. The comparison converts lengths before checking them. Litres and kilograms are unsupported dimension units: entering 55 kg in a length field asks you to correct that field.
If the bag and reference use different measurement bases, the result reads Basis differs. The table still shows the numerical comparison. Remeasure or choose a reference with the same basis before applying its limits.
The comparison keeps height, width and depth in their declared order. It does not rotate a bag or test a combined-dimensions allowance. No airline size chart is built into the tool.
Check the actual journey and product
A dimension comparison does not approve a bag for boarding. Check the allowance attached to your actual booking, including each operating carrier and connection.
The carrier, fare and route can change the baggage conditions. Check weight and permitted piece counts separately. Aircraft storage and operating requirements can also affect what travels in the cabin.
Use the exact product variant’s specifications, including whether its measurements describe the expanded or closed bag. Remeasure after opening an expansion zip or filling an outside pocket.
Keep the reference name with your result and compare it with the booking’s current baggage rules before you travel. A retailer’s Cabin or Small label supplies no universal allowance.