Monstera pot size guide from measured pot dimensions
Compare a measured nursery pot with the usable space inside another pot.
Dimension check
Meets allowances
Uses the widest container diameter and narrowest internal diameter.
Calculated clearance
On each side
1 cm
Above container
3 cm
| Dimension | Required | Entered | Check |
|---|---|---|---|
| Diameter | 20 cm | 21 cm | Pass |
| Depth | 18 cm | 20 cm | Pass |
Chosen allowance: 0.5 cm on each side and 1 cm extra height.
Meets allowances. Side clearance 1 cm. Height clearance 3 cm.
Measure the existing container
This monstera pot size guide compares your container’s outside dimensions with the clear space inside a candidate pot. Enter your own handling allowances.
Measure across the outside rim, including any lip or handles. Measure the base separately, then enter whichever diameter is widest.
Measure the container’s height from its supporting base to its highest rim. Leaf height and plant age do not enter the calculation.
For a cover pot, the object being fitted is the existing nursery pot. For direct repotting, root space and growing conditions need a separate assessment.
The example starts with the Elho green basics growpot 19 cm. Its listed outside dimensions are 19 cm across and 17 cm high.
Measure your actual container before buying. The example candidate’s internal dimensions are fictional and are not specifications for an Elho cover pot.
Compare replacement and cover pots
Use internal dimensions for the candidate pot. An outside diameter includes its walls and cannot establish usable clearance.
Enter the narrowest clear diameter through the space the container will occupy. Include any narrower neck or opening through which it must pass.
Usable depth starts above anything left inside the pot, including a raised base, insert or saucer. Subtract that occupied height before entering the depth.
The tool uses a conservative cylindrical envelope. It compares the widest container diameter with the narrowest internal diameter, even when both pots taper.
The fictional candidate has 21 cm of clear internal diameter and 20 cm of usable depth. The example allows 0.5 cm per side and 1 cm above.
Required diameter is 19 + 2 × 0.5 = 20 cm. Required depth is 17 + 1 = 18 cm. Both checks pass.
The calculated gaps are 1 cm per side and 3 cm above the container. These are dimensional clearances, not a prescription for root growth or drainage.
With an internal diameter of 19.9 cm, side clearance falls to 0.45 cm. The result reads “Below allowances” because that misses the entered 0.5 cm gap.
A tapered pot can fail this conservative check yet fit after a shape comparison. Try the actual containers together to check taper, insertion and stable support.
For a replacement growing pot, this comparison only shows how its space compares with the old container. It does not choose a new root-container size.
Check drainage and plant care
Check the growing pot’s drainage holes separately from its dimensions. Elho lists a drainage system for the example growpot.
A closed cover pot can retain water draining from the nursery pot. Empty collected water so the growing container does not stand in it.
The Royal Horticultural Society’s Monstera care guide warns that prolonged standing water and overwatering can cause root rot.
Adding a dimensional allowance does not create drainage holes or a watering schedule. A size match cannot assess root health or decide when repotting is needed.
Choose a replacement growing pot with the plant’s root condition and care requirements in mind. Keep that decision separate from checking a cover pot’s internal space.