Nail size guide for press-on tips

Compare ten nail widths with a named press-on tip chart.

Choose the chart

SHANGMENG almond tips. Widest-point width only.

Measurement unit

Left hand

Right hand

Widths within chart

9 of 10

SHANGMENG · Almond · Short

Chart references only. Physical fit needs the actual tips.

9 of 10 widths are within the selected chart’s width span.

Left hand comparisons

Left finger widths and declared tip references
FingerWidthChart references
Thumb14.3 mmBetween widths. #1: 14 mm wide, 20.8 mm long; #0: 14.6 mm wide, 21.1 mm long. Nearest gap 0.3 mm.
Index11 mmExact width. #4: 11 mm wide, 19.6 mm long.
Middle11.9 mmExact width. #3: 11.9 mm wide, 19.9 mm long.
Ring10.7 mmExact width. #5: 10.7 mm wide, 19 mm long.
Little finger8.8 mmExact width. #11: 8.8 mm wide, 16.8 mm long.

Right hand comparisons

Right finger widths and declared tip references
FingerWidthChart references
Thumb15 mmAbove chart. #0: 14.6 mm wide, 21.1 mm long. Nearest gap 0.4 mm.
Index11.2 mmBetween widths. #4: 11 mm wide, 19.6 mm long; #3: 11.9 mm wide, 19.9 mm long. Nearest gap 0.2 mm.
Middle11.9 mmExact width. #3: 11.9 mm wide, 19.9 mm long.
Ring10.2 mmExact width. #6: 10.2 mm wide, 18.9 mm long.
Little finger7.6 mmExact width. #14: 7.6 mm wide, 14.9 mm long.

All chart dimensions and gaps are in mm. Between-width entries retain both neighbours.

Measure for the actual press-on chart

This nail size guide compares each finger’s width with SHANGMENG’s declared almond-tip dimensions. Choose Short or Extra short to match the product’s shape and length.

Follow SHANGMENG’s press-on nail size guide for its widest-point measurement. Measure across the bare nail from one side edge to the other and record both hands separately.

A straight width crosses between the side edges. A surface-arc measurement follows the curve over the nail. These are different distances, even when both use millimetres.

This comparison uses the chart’s width column. It does not convert a curved-surface reading into a straight width. Use the exact seller’s measurement method before comparing numbers.

  1. Find the chart for the actual product, including its shape and length.
  2. Measure each finger by that chart’s method. Keep the left and right hand records separate.
  3. Choose the supported chart and measurement unit, then replace the fictional example with your ten widths.
  4. Read each finger’s comparison and check the actual tips before applying adhesive.

Compare the declared nail-tip sizes

An exact width retains every tip number printed at that width. Between-width entries show the nearest lower and higher chart widths, without assigning a fitted size.

The fictional example opens on Short almond. A 14.3 mm left thumb lies between #1 at 14 mm and #0 at 14.6 mm. Each is 0.3 mm away.

The 15 mm right thumb is 0.4 mm above the chart’s widest tip, #0 at 14.6 mm. The tool reports Above chart and keeps the other finger comparisons.

For Short almond, 9.6 mm appears at both #8 and #15. Both references remain visible. That repeated width does not establish two different physical fits.

The nearest gap is the smallest absolute difference between an entered width and a displayed chart width. A gap is a numerical difference, without an added fitting tolerance.

Inch entries multiply by 25.4 before comparison. For example, 0.5 inches equals 12.7 mm. The result tables keep the maker’s millimetres so their dimensions remain comparable.

The headline counts measurements inside the chart’s smallest-to-largest width span. It includes between-width entries. It does not count confirmed fits or available pieces in a box.

Check the actual tips before use

Width alone does not establish curvature or comfort. A matching number can still rock on the nail or press against the side edges.

NAILINK’s fitting guidance calls for checking each actual piece on both hands before adhesive. Compare neighbouring tips or a sizing kit for the exact product.

Keep tip numbers with the maker, shape and length in your notes. Another chart can assign a different width to the same number.

A photo cannot establish this physical fit. Rest the actual tip over the nail and check side coverage, skin clearance and comfort before using it.

If your width is outside the chart, compare another product’s published dimensions or its sizing kit. A tool cannot extend a chart by inventing a larger or smaller tip.