Necklace size guide in inches and centimetres
Compare chain lengths in inches and centimetres with a labelled reference drawing.
Chain 1 converted
45.72 cm
Original: 18 in
Chain 1: 18 inches equals 45.72 centimetres.
Length comparison
| Chain | Entered | Inches | Centimetres |
|---|---|---|---|
| Chain 1 | 18 in | 18 | 45.72 |
| Chain 2 | 20 in | 20 | 50.8 |
| Chain 3 | 24 in | 24 | 60.96 |
36 cm circular reference with equal straight extensions. The drawing does not predict placement on your body.
Read chain length in the same units
Necklace chain length is the usable length around the necklace, measured along the chain. Pendant height is a separate dimension. A straight measurement from your neck to the pendant is the drop.
QxH’s jewellery measurement guide measures usable length and excludes clasp parts that overlap inside the fastening. It records adjustable necklaces at their shortest and longest positions.
Use the maker’s stated chain measurement for the fastening position you intend to wear. Check whether the listed measurement includes an extender or a fixed decorative section.
One inch is exactly 2.54 centimetres under NIST’s conversion factors. Multiply inches by 2.54, or divide centimetres by 2.54 to get inches.
The starting example gives 18 inches × 2.54 = 45.72 cm. The other chains are 20 inches = 50.8 cm and 24 inches = 60.96 cm. The Entered column keeps the source measurement beside both conversions.
Compare the reference positions
The drawing compares lengths using an idealised loop around a circular neck reference. It has no shoulders or chest contour, so it cannot predict where a necklace rests on you.
For reference circumference C, the circle radius is C ÷ (2 × π). Each loop has two semicircles of that radius and two equal straight extensions.
The semicircles total C. A chain of length L adds (L - C) ÷ 2 to each straight side. With a 36 cm reference, 45.72 cm adds 4.86 cm per side.
These extensions describe the drawing’s geometry, not a measured drop on a person. All loops use the same scale. A chain shorter than the reference keeps its conversions and reads Below neck reference.
The optional neck field accepts 10 to 100 cm. Leaving it blank uses 36 cm as a drawing example, with no claim that this is an average neck.
A men’s necklace size guide uses the same length conversion. Compare 20 and 24 inches with your shirt neckline and preferred position. Gender does not change the conversion or establish a fit formula.
Check the actual necklace before choosing
Use a cord cut to the stated usable chain length, or measure an existing necklace you like. Place it around your neckline with the clothing you intend to wear.
Hold the cord ends together without pulling it tight. Compare the lower point with the shirt collar or neckline. Repeat at each proposed length.
For an existing necklace, undo the clasp and lay it flat along a ruler. Measure its usable fastening length, then check the pendant’s height and width separately.
A pendant’s weight changes how a chain hangs. A fixed centrepiece, thick links and a stiff collar can also behave differently from the reference loop.
Check the actual product dimensions and clasp adjustment range before choosing. Mejuri’s necklace sizing guide explains how necklace length and pendant weight affect styling.
For retailers, list the usable chain length at each adjustment and give pendant dimensions separately. Keep any reference drawing beside those measurements, with its geometric limits visible.