Pearl size guide with a printable comparison

Compare pearl diameters and download a printable size reference.

Choose diameters

Up to six sizes in mm, separated by commas.

Comparison range

Compares diameters from 0.5 to 30 mm.

Check a print

Print check

Selected diameters

6 to 9 mm

Comparing 6 mm and 9 mm diameters.

Relative circles

6 mm9 mm

Screen circles show relative size. Use the checked print for physical scale.

Printable reference

Print A4 landscape at 100% / Actual size.

Read a pearl’s millimetre size

A pearl’s diameter is the distance across its centre, from one edge to the opposite edge. This pearl size guide compares those diameters as labelled circles.

The Gemological Institute of America’s pearl measurement guidance describes round and near-round pearls by diameter in millimetres. Other shapes need length or depth alongside width.

A circle cannot describe the outline of an irregular pearl. Use the product’s individual dimensions for an oval, drop or baroque shape. A graduated strand needs its smallest and largest pearl sizes.

A stated range such as 7 to 8 mm covers more than one diameter. Enter both endpoints or add a comparison range. The tool includes the endpoints and removes duplicate sizes.

Size alone does not establish quality or value. GIA’s pearl quality factors also distinguish shape and lustre, alongside surface and nacre quality. The circles establish neither origin nor authenticity.

Compare circles and print to scale

Each circle uses a radius equal to half its labelled diameter. Screen zoom and device scaling change its physical size on your display.

Download the PDF for printing. Its A4 landscape page contains the selected circles and a 100 mm calibration line. The SVG retains the same physical page dimensions.

  1. Select A4 landscape and 100% or Actual size in the print dialogue. Turn off Fit to page and automatic shrinking.
  2. Measure the calibration line between its end ticks with a ruler. The line must measure 100 mm before you use the circles as a physical reference.
  3. Choose Check a print and enter your ruler reading. If the line is short, increase the print scale. If it is long, decrease it.
  4. Apply the suggested percentage change to the current scale, then print and measure again. Continue until the line measures 100 mm.

For example, a 95 mm line needs a scale increase of 5.26%. From a 100% setting, that gives about 105.26%. Printer rounding makes the repeated ruler check necessary.

Keep the same printer and paper settings when you reprint. The export keeps its nominal dimensions while the print dialogue supplies the correction.

Check the actual jewellery dimensions

In the fictional example, a 9 mm pearl has 1.5 times the diameter of a 6 mm pearl. Its circular outline covers 2.25 times the area.

Those circles describe the pearls alone. A stud’s surrounding setting can be wider, and an earring’s drop includes its attachment. Necklace length measures the complete strand.

Keep the supplier’s stated size range and measurement tolerance with the product description. A nominal 8 mm label does not specify an exact tolerance for every pearl.

Use the retailer’s stated grading definitions separately from dimensions. This guide assigns no letter grade, price or on-body appearance to a diameter.

Before comparing products, match the pearl dimensions and the full jewellery measurements. A checked print gives a flat diameter reference for that comparison.