Rug size guide for room and furniture layouts

Compare rug dimensions with your room and furniture. Set placement and clearances, preview the layout and see which measurements still need checking.

Room and rug

Rug shape

For a round rug, enter its diameter.

Measure from the left wall.

Measure from the top wall.

Furniture footprint

For a sectional, use the main sofa depth.

Main rectangle’s centre from the left wall.

Main rectangle’s centre from the top wall.

Clockwise from front facing down the plan.

Placement preference

Distance from each outer furniture edge.

Inside rug edges for legs. Outside furniture for beds or chairs.

Your minimum preferred gap to every wall.

Entered layout

Meets preferences

Selected placement has 15 cm spare beyond your preference.

Scaled layout preview

Meets preferencesRoom 400 by 450 centimetres. Selected placement has 15 cm spare beyond your preference.Solid outline: room and furnitureGreen dashes: rug. Red: preferenceMeets preferences

Dimension comparison

Rug floor area

3.68 m²

Placement spare

15 cm

Clearances from entered footprints
MeasurementResult
Rug to left wall85 cm
Rug to right wall85 cm
Rug to top wall170 cm
Rug to bottom wall120 cm
Furniture to nearest wall100 cm

Positive values are inside. Negative values show a shortfall or overflow.

Meets preferences. Selected placement has 15 cm spare beyond your preference.

Measure the room and furniture

This rug size guide compares the dimensions you enter with your room and furniture, using your chosen placement clearance. A match means those measured preferences fit.

Draw the room from above. Choose one corner as the top left and measure the usable floor width across and length down. Exclude fixed cupboards and other unusable floor space.

Measure the outside furniture footprint, including arms or the bed frame. Enter its centre from the same left and top walls. At zero rotation, its front faces down the plan.

For a sectional, enter the main sofa’s width and depth. Add the left return’s width and total depth from the sofa’s back. Rotate the whole shape together.

For a bed, use its actual frame dimensions. A queen bed or king bed label does not establish the frame’s outer footprint. Measure a dining tabletop at its widest outside points.

A labelled 160 × 230 cm rug occupies a rectangle 1.6 m by 2.3 m, or 3.68 m². The example turns that footprint across the room, entering width 230 and length 160.

That label measures the rug itself. Usable floor space depends on its position, furniture and the gaps you want to leave. A round rug’s width is its diameter.

Choose a placement preference

Choose the points or area you want the rug to cover, then enter your clearance. The example’s 10 cm leg clearance and 20 cm wall gap are fictional preferences.

Front leg points checks the front pair at your entered leg inset. A sectional adds the return’s front points. All leg points also checks the rear points.

For either leg option, Placement clearance is the minimum distance from each checked point to the rug’s edge. The model uses the same leg inset from each edge.

Bedside extension checks an area from the bed’s centre line to its foot. Placement clearance extends that area past both sides and the foot. The head-end half is outside this preference.

Chair pull-out area expands the furniture rectangle by your clearance on every side. Include the chair’s occupied depth and the space it needs when pulled out.

IKEA’s dining rug guide suggests allowing 60 to 70 cm beyond the table on both sides. Use your actual pulled-out chair measurements for this comparison.

A round rug checks every target point against the circle. A table corner can fall outside the rug while still sitting inside its width and length.

For an entryway rug, compare its wall gaps and check the actual door swing separately. The selected furniture preference applies only to the footprint you enter.

Read the layout and check the product

The fictional living room is 400 cm wide and 450 cm long. Its 230 × 160 cm rug has its centre 200 cm across and 250 cm down.

The sofa is 200 × 90 cm, centred 200 cm across and 160 cm down, with a 10 cm leg inset. Front leg points leaves 15 cm spare beyond the selected 10 cm clearance.

The rug leaves at least 85 cm to the walls, exceeding the chosen 20 cm gap. Switching to All leg points puts the rear requirement 55 cm outside the rug.

For a fictional bedroom comparison, keep the room and rug dimensions. Move the rug’s centre down to 270 cm. Enter a 160 × 200 cm bed centred at 200 cm across and down.

Choose Bedside extension with 40 cm clearance. The required width is 240 cm, so the 230 cm rug falls short by 5 cm on each side.

Increasing the example rug width to 500 cm makes it exceed the 400 cm room by 50 cm at each side. The result reports overflow and keeps the full footprint visible.

Solid outlines show the room and furniture. Green dashes show the rug. Red points or a red dashed area show the selected placement. Download SVG keeps the same proportions.

The diagram uses your entries. It does not measure your real room or guarantee colour, pile, door clearance or furniture suitability. It models one furniture footprint in a rectangular room.

Check awkward alcoves, other furniture and the rug’s product measurements before ordering. Tape the footprint on your floor and open nearby doors over the intended rug and underlay thickness.