Sleeping bag size guide by body and internal dimensions

Compare your height and required width with Alpkit sleeping-bag dimensions.

Your dimensions

Measurement unit

Standing height, from head to foot.

Needed inside bag width, with movement room. Not body circumference.

Chart and allowance

Bag chart

Extra internal length above your height. The example uses 10 cm.

Alpkit SkyeHigh and Ultra adult charts only.

Listed sizes meeting your needs

Regular

Dimension comparison only. Try the actual bag.

Regular meets the example’s entered needs.

Room after your requirements

Length needed

180 cm

Width needed

70 cm

Clearance after entered requirements
SizeLengthWidthAssessment
Regular5 cm spare5 cm spareMeets entered needs
Long35 cm spare5 cm spareOutside height range

Length allowance: 10 cm. Required width includes your movement room.

Selected maker chart

Alpkit SkyeHigh

Published user height and internal dimensions
SizeUser heightInside lengthInside width
Regular160 cm to 175 cm185 cm75 cm
Long175 cm to 190 cm215 cm75 cm

Both the height range and entered dimensions must pass.

Read the usable bag dimensions

This sleeping bag size guide compares your height and required internal width with two named Alpkit charts. A listed size must pass every requirement.

User height is the maker’s body-height range. Internal length measures the space inside the bag. External shell dimensions include the outside construction.

A long outer shell does not establish usable internal length. Keep the maker’s user-height range alongside the interior measurements.

Enter required width as a bag-width requirement, including the room you want for movement. A comfortable bag with known internal dimensions can provide a reference.

Body circumference measures around you. It cannot be entered directly as width, and this tool does not convert circumference into bag width.

Alpkit’s SkyeHigh size chart lists 185 cm and 215 cm internal lengths. Its Ultra size chart lists 190 cm and 210 cm.

Both charts list 75 cm internal width. Each bag tapers towards the feet, so that single width does not describe every point inside.

Compare an entered body-size example

The fictional example uses a height of 170 cm, required width of 70 cm and length allowance of 10 cm.

The minimum internal length is height plus allowance: 170 + 10 = 180 cm. The allowance is your chosen requirement, not a maker recommendation.

SkyeHigh Regular has 185 cm internal length, leaving 5 cm after that requirement. Its 75 cm width leaves another 5 cm.

The Regular user-height interval is 160 to 175 cm, which includes 170 cm. Long starts at 175 cm, so it fails this example’s height check.

Change required width to 76 cm and both sizes read “Too narrow”. A longer bag does not fix the 1 cm width shortfall.

Endpoints count. At 175 cm, both printed height intervals apply, provided the internal dimensions meet your entries. No listed size appears outside all supported ranges.

Inches convert to centimetres by multiplying by 2.54. The comparison uses unrounded values, with rounded dimensions shown for reading.

Check the actual bag and conditions

A passing dimension comparison is a shortlist for trying the actual sleeping bag. Check its own model and size against the selected chart.

Zip the bag with your intended sleeping clothing and liner. Check that you can move without pressing against the footbox or pulling the fabric tight.

Check shoulder, hip and foot space separately. A width at the shoulders cannot promise room at the knees when you turn.

The result covers dimensions only. Insulation, temperature ratings, season choice and outdoor safety planning require separate assessment for the actual conditions.

Use the actual bag’s temperature guidance and plan your full sleep system for the trip. A size match gives no warmth or survival rating.