Sofa size guide for room and access dimensions

Compare a sofa’s room footprint and one declared delivery face with your measurements.

Assembled sofa

Measurement unit

Room and allowance

At each room and opening edge.

One delivery package

Along the carrying direction.

One clear opening

Room and access comparison

Route needs checking

Centred footprint and one fixed carrying orientation.

Dimensions compared

Sofa footprint

2.17 m²

Assembled height

83 cm

Entered dimension comparisons
ComparisonDistance
Left and right wall gaps61 cm
Front and rear wall gaps128 cm
Room gap shortfall0 cm
Opening width spare20 cm
Opening height spare148 cm
Opening allowance shortfall0 cm

Spare opening dimensions are total gaps. Shortfalls include the allowance at both opening edges.

Delivery route unresolved. Carry length, turns and stairs need a physical check.

Route needs checking. Room gap shortfall 0 cm. Opening allowance shortfall 0 cm.

Measure the sofa as delivered

This sofa size guide compares the assembled footprint with a rectangular room and one delivery package face with one opening. Delivery access stays unresolved.

Use the maker’s dimension drawing for the assembled width, depth and height. Include arms and any projecting back cushions in the stated overall dimensions.

IKEA’s KIVIK buying guide shows the three-seat sofa at 228 cm wide, 95 cm deep and 83 cm high.

The example uses that assembled size. IKEA’s KIVIK frame packaging lists its first package at 90 cm wide, 52 cm high and 185 cm long.

The frame arrives in two packages. Compare each package separately, including the cover package where applicable. The largest package by volume need not have the most restrictive face.

For another sofa, replace all dimensions with its own drawing and delivery measurements. Remove legs or arms only where the maker’s instructions permit it.

A removable fabric cover does not mean the frame comes apart. When measuring an unpacked section, include fixed fittings and any protection the delivery team needs.

Compare room and access limits

The room calculation centres the sofa without rotating it. Subtract the sofa dimension from the matching room dimension, then halve the remainder.

The example’s room and opening measurements are fictional. A 228 × 95 cm sofa in a 350 × 350 cm room leaves 61 cm at each side.

The displayed front and rear gaps are 128 cm each. Its footprint is 2.17 m². With 5 cm extra gap per edge, the room gap shortfall is 0 cm.

The delivery example points the 185 cm package length through the opening. Its 90 × 52 cm face is compared with a 110 × 200 cm opening.

That leaves 20 cm total spare width and 148 cm total spare height. Subtracting 5 cm at each opening edge leaves no allowance shortfall.

“Route needs checking” means those entered comparisons meet the allowance. The calculation does not establish that the package can reach or leave that position.

“Measurements fall short” means a room gap or fixed-orientation opening comparison misses the allowance. The shortfall names the missing distance, without deciding whether another carrying orientation works.

Room gap shortfall is the largest missing per-side gap. For the opening, the shortfall is the largest missing total width or height after allowing twice the extra gap.

Carry length can prevent a turn even when the face clears an opening. Stairs also need headroom along the lift, with space at landings and corners.

Choose centimetres or inches for entry. Switching units preserves the measurements. Results use centimetres and square metres, with 2.54 cm per inch.

Confirm the route physically

Walk the complete delivery route with the actual package drawings. Measure clear openings with doors in their delivery position, allowing for handles and fixed trim.

Measure the space before and after each opening. Include lift doors, lift interiors and stair landings where the delivery uses them.

Give the delivery team the package sizes and route measurements before ordering. Obtain its confirmation for the actual handling plan and any permitted disassembly.

The allowance is your entered preference, not a structural or accessibility standard. The arithmetic does not assess load-bearing structures, safe lifting or permission to remove doors.

Tape the assembled footprint on the floor and test nearby doors and drawers. Check the height against windows or shelves separately.

Try the sofa for seating comfort. Overall depth includes the back and arms, so it cannot establish usable seat depth or support.