Trampoline size guide by frame and available space

Compare trampoline frame dimensions with an entered space and declared clearance requirements, keeping the jumping area and product limits separate.

Declared product

Name the model and manual or product sheet.

Measurement unit

The chosen unit applies to every number.

Frame shape

Use the full outside footprint.

Available space

Product clearances

Leave blank if the requirement is unknown.

Leave blank if the requirement is unknown.

Leave blank if the requirement is unknown.

Leave blank if the requirement is unknown.

Dimension comparison

Fits entered space

Frame and required space

Entered footprint comparison
AxisFrameAvailableRequiredResult
Width3 m6.5 m6 m0.5 m spare
Depth3 m7.2 m6 m1.2 m spare

Fictional product requirements. Round frame: width is the diameter. Clearances: left 1.5 m; right 1.5 m; front 1.5 m; rear 1.5 m.

Fits entered space. Width: 0.5 m spare. Depth: 1.2 m spare.

Identify the product dimensions

This trampoline size guide compares the outside frame and declared side clearances with a measured rectangular space. Use the exact model’s installation requirements for your entries.

A round frame uses its outside diameter for both axes. Rectangular and oval frames use their declared width and depth. Include any part that projects beyond the frame in the full outside footprint.

Jumping mat dimensions describe the jumping surface. Enclosure height describes the net, while total height can include the raised mat. These measurements answer different questions.

Vuly’s Small Ultra 2 dimensions list a 288 cm overall diameter and a 195 cm mat diameter. The page lists 2 m clearance around all sides.

Those figures belong to that product. Enter the actual model’s stated requirement and its measurement reference, including whether clearance starts at the frame or another boundary.

The tool adds each clearance to the outside footprint. If the manual uses a different starting boundary, establish the equivalent outside-footprint requirement before entering it.

Compare the available space

Required width equals frame width plus the left and right clearances. Required depth equals frame depth plus the front and rear clearances.

Measure the usable rectangle in the orientation you plan to install the trampoline. Keep obstructions outside the required area. The tool checks each axis separately and does not rotate the frame.

The fictional example has a 3 m round frame and 1.5 m clearance on each side. Its required space is 6 × 6 m.

In the entered 6.5 × 7.2 m space, the result reads Fits entered space. Width has 0.5 m spare and depth has 1.2 m spare across their full axes.

Enter 6 m for both available dimensions and both rows read At boundary. Equality leaves no extra allowance for measurement error or an unrecorded obstruction.

Reduce available width to 5.9 m and keep depth at 6 m. The result reads Exceeds space, with width exceeding the available space by 0.1 m.

Clear the left clearance and the width requirement reads At least 4.5 m. The headline reads Clearance missing unless the known dimensions already exceed the available space.

A blank requirement stays unknown. Enter zero only when the actual product guidance permits zero clearance on that side. Spare space on one axis never cancels excess on the other.

Choose metres, centimetres or feet for all entries. Changing the unit reinterprets the numbers already entered, so convert every measurement to that unit before comparing.

The result retains the frame, available space and clearance assumptions beside the source name. A round frame uses its diameter for depth even when the hidden depth field holds an earlier entry.

Check the actual site and product

Dimensional fit alone is not a safety approval. The result compares horizontal measurements and the requirements you entered.

The ACCC’s trampoline safety guide calls for a flat surface, separation from surrounding hazards and overhead clearance. It also directs buyers to follow the product’s assembly instructions.

Check the ground and stability at the actual site. Assess overhead branches, wires and clotheslines separately, using the required height and the reference point stated in the applicable guidance.

Allow for safe access to the entrance and room to assemble the trampoline. Follow the model’s anchoring and maintenance instructions, including its wind precautions.

Match the manufacturer’s user requirements and load limits to the intended jumper. A frame diameter or jumping-mat area cannot establish the permitted user weight or number of jumpers.

Mark out the full required footprint before ordering, then compare it with the model’s installation diagram. Keep the stated clearances free of furniture and other equipment.