Watch size guide for female wrists and case sizes
Compare watch case dimensions with a measured wrist. See a scaled reference, check lug-to-lug and strap measurements, and choose by your own preferences. Your measurements stay in your browser.
Case A / wrist width
70.69%
Same-scale comparison
Case B / wrist width
78.54%
Wrist reference width
50.93 mm
Wrist width assumes a circle: circumference divided by pi. Both cases share one scale.
Case A is 70.69% of the wrist reference width. Case B is 78.54%.
Measure the wrist and the whole case
This watch size guide compares two stated case sizes with your wrist reference. Enter your measurements to see the proportions, then choose the appearance you prefer.
Measure circumference with a flexible tape around the place you wear your watch. Measure width straight across that part of your wrist, looking down from above.
A circumference cannot reconstruct a three-dimensional wrist. The Around wrist option assumes a circular cross-section and divides circumference by pi. Across wrist uses a separate width measurement directly. Its fictional example starts at 50 mm, giving 72% for Case A.
Each shaded strip is a flat width reference, not a model of your arm. The round outline is a circle. The square outline has equal width and height.
Case diameter measures the body across a round watch. Lug-to-lug is the full length between the outer lug tips. Lug width is the gap where the strap attaches.
For a maker’s specification example, NOMOS lists the Club’s dimensions separately: 36 mm diameter, 8.2 mm height, 44.3 mm lug-to-lug and 18 mm lug width.
The tool’s fictional Case A is 36 mm across and 44 mm lug-to-lug. Imagine a thickness of 9 mm and an 18 mm strap opening. Thickness affects the side profile and is not drawn here.
These outlines exclude the crown and any bracelet end link that projects beyond the lugs. For a rectangular or unusual case, compare the maker’s full outline separately.
Compare case sizes without a gender rule
The same wrist measurements work for female and male customers. Gender does not determine a correct case size, so this guide applies no gender-based size range.
The example uses a 160 mm circumference. Its circular assumption gives a 50.93 mm wrist reference. Fictional Case A is 36 mm across and Case B is 40 mm.
Those case widths are 70.69% and 78.54% of the reference width. Both drawings use the same scale. These percentages describe geometry and are not fit scores.
Compare how much of the shaded width each case covers. Then compare the 44 mm and 48 mm lug-to-lug lines. The dashed marks show their full length without inventing a particular lug shape.
A watch face size guide also needs the visible dial opening. A wide bezel can leave a smaller dial inside the same case diameter. This tool draws the case boundary only.
Leave lug-to-lug blank if the maker does not provide it. The case comparison still works and the drawing says that the lug measurement is missing.
The tool accepts wrist entries from 1 to 500 mm, case widths from 0.1 to 100 mm and lug lengths up to 150 mm. Inch entries use the same limits after conversion.
Check strap and print scale separately
A watch strap size guide needs both attachment width and wearable length. Match the strap’s attachment width to the watch’s lug width and confirm its end shape and fixing are compatible.
For a fictional 160 mm wrist, an 18 mm attachment and a maker-stated fitted wrist range of 145 to 185 mm pass those dimensional checks. Try the available holes and clasp adjustment.
A strap listed as 110/70 mm has two pieces totalling 180 mm. That sum is not its fitted wrist circumference. Buckle overlap and the case length affect the closed loop.
Check the maker’s fitted wrist range for that watch and clasp combination. NOMOS’s strap listing separates the 18 mm width from length choices and model compatibility.
Download the SVG reference and open it in a browser or drawing app. Print at 100% or actual size, with Fit to page turned off. Larger references need larger paper.
Measure the calibration line with a ruler. It must be 50 mm from end to end before you use the drawing as a physical reference. The on-screen preview resizes to your screen.
A scaled drawing cannot prove comfort or replace trying the actual watch. Check wrist movement and strap adjustment with the watch on, including how its thickness sits under a sleeve.