Wicket keeping gloves size guide by hand measurement

Match hand length and palm circumference to Kookaburra UK keeping-glove sizes.

Your hand measurements

Chart: Kookaburra UK cricket gloves, including wicket-keeping gloves.

Measurement unit

Straight from the start of your wrist to your longest fingertip.

Measure around your palm.

Supported glove size

Adult

Length 19.5 to 20.3 cm. Palm 22.25 to 23.5 cm.

Inside one chart interval

Both measurements must share a chart row. Try the actual glove with your inners.

Supported glove size: Adult. Length 19.5 to 20.3 cm. Palm 22.25 to 23.5 cm.

Measure for keeping gloves

This wicket keeping gloves size guide compares hand length and palm circumference with Kookaburra’s UK cricket glove chart. Both measurements must fall within the same size row.

Measure hand length in a straight line from the start of your wrist to the tip of your longest finger. Measure around your palm for circumference. Enter millimetres or centimetres.

The Kookaburra UK cricket glove chart includes wicket-keeping gloves. Kookaburra’s Australian size guide publishes different length bands and also covers inners. Use the reference attached to the product you’re buying.

Inners go inside keeping gloves. Batting gloves are a separate product, even when a maker uses one sizing chart for both. Keep the glove type and regional chart together when comparing sizes.

Read the declared size interval

The fictional starting example has a 198 mm hand length and 228 mm palm circumference. Both measurements fall in the Adult row.

SizeHand lengthPalm circumference
Extra Small Junior15.5 to 16.3 cm15.85 to 17.15 cm
Small Junior16.3 to 17.1 cm17.15 to 18.45 cm
Junior17.1 to 17.9 cm18.45 to 19.7 cm
Youth17.9 to 18.7 cm19.7 to 20.95 cm
Small Adult18.7 to 19.5 cm20.95 to 22.25 cm
Adult19.5 to 20.3 cm22.25 to 23.5 cm
Oversize Adult21.1 to 21.9 cm24.75 to 26.05 cm

Each interval includes both endpoints. At 195 mm long and 222.5 mm around the palm, Small Adult and Adult both match. The tool keeps both sizes for comparison.

The chart leaves gaps before Oversize Adult. A 207 mm length and 241 mm circumference match no row. Measurements that fall in different size rows also receive no supported match.

The result preserves those gaps. It adds no allowance and never rounds a measurement into the next size.

Check the glove and inners

Kookaburra’s SC 3.1 keeping-glove fitting instructions say to use inners and check the actual glove before use. Try the listed sizes with the inners you intend to wear.

Open and close your hands in the glove. Check the fingertips and wrist for restricted movement or slipping, following the model’s instructions.

A chart match identifies a measurement interval. It does not assess protective suitability or certify that a glove fits. For an overlap or a missing match, compare the actual sizes with the retailer.