Earring size guide by hoop and jewellery dimensions

Compare hoop dimensions with a declared reference and convert post gauge to millimetres.

Choose a reference

Declared hoop example

Uniform circular hoops. Both examples have 1.2 mm bodies and 18 gauge posts.

Enter product dimensions

Measurement unit
Listed diameter measures

0.1 to 100 mm, or the inch equivalent.

0.1 to 10 mm across the hoop’s uniform body.

Maria Tash table: 14, 16, 18, 19 or 20 gauge.

Inner diameter difference

+2 mm

Entered hoop compared with the 8 mm reference.

Converted dimensions

Inner diameter

10 mm

Outer diameter

12.4 mm

Inner diameter in inches

0.39 in

Post thickness

1 mm

18 gauge is 1 mm in the selected table.

Same-scale hoop comparison

Entered hoop10 mm insideReference8 mm inside
Entered hoop and declared reference dimensions
DimensionEnteredReference
Inner diameter10 mm8 mm
Outer diameter12.4 mm10.4 mm
Body thickness1.2 mm1.2 mm
Post thickness1 mm1 mm

Hypothetical circular references. The screen drawing shows proportions, not physical size or fit.

Entered inner diameter is 2 mm larger than the 8 mm reference.

Identify the jewellery dimension

An earring size guide compares matching measurements. Inner hoop diameter measures the opening. Outer diameter includes the hoop body on both sides.

Post gauge measures the wearable post’s thickness. Hanging length measures the drop from the stated attachment point. A stud’s decorative width measures its visible face.

Maria Tash’s jewellery sizing drawings distinguish hoop sizing from post lengths and decorative stone sizes. Match the measurement lines in the product drawing before entering a number.

This hoop size guide models a circle with a uniform body. Outer diameter equals inner diameter plus twice the body thickness. The post can be thinner than that body.

An oval hoop needs separate height and width. Hinges and decorative settings can change the opening. Use those products’ stated dimensions without applying the circular formula.

Compare a size example

The hypothetical entered hoop has a 10 mm inner diameter and a 1.2 mm body. Its calculated outer diameter is 12.4 mm.

The selected reference has an 8 mm opening and the same body thickness, making its outer diameter 10.4 mm. The entered opening is 2 mm larger.

Both examples have an 18 gauge post. Maria Tash’s gauge table gives 18 gauge as 1 mm. That number describes the post, independently of the 1.2 mm hoop body.

The tool uses that maker’s published equivalents for 14, 16, 18, 19 and 20 gauge. Another entered gauge shows “Not listed” for post thickness while the diameter comparison stays visible.

One inch is exactly 25.4 mm. A 5/16 inch listing converts to about 7.94 mm. A product labelled 8 mm can use a rounded equivalent.

Results show up to two decimal places below 100. Calculations keep the unrounded values. A rounded label establishes neither a manufacturing tolerance nor an exact measurement of an individual earring.

Check actual fit and materials

A dimensional comparison describes the jewellery. Piercing condition, material sensitivity and wearing comfort require separate assessment. This tool gives no piercing or healing advice.

Compare the product’s stated material and fastening separately from its measurements. Matching diameter or gauge alone cannot establish that an earring will suit you.

For a stud, check decorative face width and usable post length as separate measurements. For a drop earring, use the seller’s stated start and end points for hanging length.

Use the product’s actual dimensional drawing and material description when choosing between earrings. The circular examples give you a reference for interpreting those measurements.